Re: [PATCH] arm64: dts: qcom: qcs6490-rubikpi3: Move PCIe GPIOs to root ports

[Dmitry Baryshkov]

On Sun, Jun 07, 2026 at 03:13:49AM +0800, Hongyang Zhao wrote:
> The Qualcomm PCIe binding deprecates perst-gpios on the host
> bridge and expects endpoint reset GPIOs to be described on the root
> port as reset-gpios.
> 
> Move the PCIe0 and PCIe1 reset and wake GPIOs to their root port
> nodes. This keeps the GPIO ownership with the device below the root
> port and matches the PCIe binding.
> 
> Signed-off-by: Hongyang Zhao <hongyang.zhao@xxxxxxxxxxxxxxx>
> ---
> Fix the PCIe reset and wake GPIO description for the Thundercomm
> RubikPi3 board.
> 
> The board currently describes PERST# and wake GPIOs on the Qualcomm
> PCIe host bridge nodes. The Qualcomm PCIe binding deprecates this
> and expects endpoint reset GPIOs on the root port nodes as
> reset-gpios.
> 
> Move the PCIe0 and PCIe1 GPIOs to the corresponding root port
> nodes.
> ---
>  .../arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts | 16 ++++++++++------
>  1 file changed, 10 insertions(+), 6 deletions(-)

Could you please refresh all kodiak DTs at once (and also move PHYs to
the the port node).


-- 
With best wishes
Dmitry