Re: [PATCH v3 1/2] dt-bindings: hwmon: pmbus: ti,lm25066: add current limit properties

[Guenter Roeck]

On Mon, Jun 15, 2026 at 05:49:16PM +0800, Potin Lai wrote:
> Add a 'ti,current-range' string property to configure the device's Current
> Limit (CL) behavior to "high" or "low" via the register, overriding the
> physical CL pin setting.
> 
> This configuration is supported on LM25066, LM5064, LM5066, and LM5066i.
> LM25056 is excluded because it does not support configuring the current
> limit via the DEVICE_SETUP register (bit 2 of DEVICE_SETUP is reserved).
> 
> The values "low" and "high" map to the respective low/high threshold
> voltages of the chips:
> - LM25066: low = 25 mV, high = 46 mV
> - LM5064, LM5066, LM5066i: low = 26 mV, high = 50 mV
> 
> Signed-off-by: Potin Lai <potin.lai.pt@xxxxxxxxx>
> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

Applied to hwmon-next.

Thanks,
Guenter