Re: [PATCH v8 5/5] iio: adc: versal-sysmon: add oversampling support

[Andy Shevchenko]

On Tue, Jun 16, 2026 at 02:15:59PM +0100, Salih Erim wrote:
> Add support for reading and writing the oversampling ratio through
> the IIO oversampling_ratio attribute. The hardware supports averaging
> 2, 4, 8, or 16 samples, plus a ratio of 1 (no averaging).
> 
> Temperature and supply channels share oversampling configuration at
> the type level (all temperature channels share one ratio, all supply
> channels share another), exposed through info_mask_shared_by_type.
> 
> The hardware encoding uses sample_count / 2 in a 4-bit field within
> the CONFIG register. Per-channel averaging enable registers must also
> be updated to activate or deactivate averaging.

This one LGTM now,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>

-- 
With Best Regards,
Andy Shevchenko