[PATCH 0/2] media: Add Himax HM1092 mono NIR sensor driver

[Ramshouriesh R]

This adds a V4L2 subdev driver and DT binding for the Himax HM1092, a
1 megapixel monochrome near-infrared image sensor. On laptops it sits
behind the IR camera used for face unlock. It speaks a single MIPI CSI-2
data lane and outputs 10-bit RAW at 560x360.

The driver exposes that one native mode, a test pattern control and the
standard fwnode properties (orientation, rotation). It has been tested on
real hardware (an ASUS Zenbook A14): the sensor probes, streams, and the
on-chip test pattern comes through the full CSI-2 pipeline.

The sensor driver and its binding are SoC-neutral, so they are sent on
their own through the media tree. The board-level device tree and PHY
work that wires this camera up on the ASUS Zenbook A14 will be sent as
its own series.

Signed-off-by: Ramshouriesh R <rshouriesh@xxxxxxxxx>
---
Ramshouriesh R (2):
      media: dt-bindings: Add Himax HM1092 NIR sensor
      media: i2c: hm1092: add Himax HM1092 mono NIR sensor driver

 .../bindings/media/i2c/himax,hm1092.yaml           | 107 +++
 MAINTAINERS                                        |   7 +
 drivers/media/i2c/Kconfig                          |  11 +
 drivers/media/i2c/Makefile                         |   1 +
 drivers/media/i2c/hm1092.c                         | 783 +++++++++++++++++++++
 5 files changed, 909 insertions(+)
---
base-commit: be5c93fa674f0fc3c8f359c2143abce6bbb422e6
change-id: 20260618-hm1092-driver-a6f2aaddf201

Best regards,
--  
Ramshouriesh R <rshouriesh@xxxxxxxxx>