[PATCH V5 5/7] arm64: dts: imx8mq-evk: Add power supply properties to Root Port node

[Sherry Sun (OSS)]

From: Sherry Sun <sherry.sun@xxxxxxx>

Add the power supply properties to the Root Port child nodes to support
the new PCI pwrctrl framework.

Legacy power supply properties are retained for backward compatibility
with existing kernels. New device trees should specify power supplies at
the Root Port level to utilize the pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index b9b03416aa39..1f07f1089026 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -403,6 +403,7 @@ &pcie1 {
 		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
 		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	/* This property is deprecated, use power supply from the Root Port node. */
 	vpcie-supply = <&reg_pcie1>;
 	vpcie3v3aux-supply = <&reg_pcie1>;
 	vph-supply = <&vgen5_reg>;
@@ -422,6 +423,8 @@ &pcie1_ep {
 
 &pcie1_port0 {
 	reset-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	vpcie3v3-supply = <&reg_pcie1>;
+	vpcie3v3aux-supply = <&reg_pcie1>;
 };
 
 &pgc_gpu {
-- 
2.50.1