[PATCH] usb: typec: anx7411: use devm_pm_runtime_enable()

[Myeonghun Pak]

anx7411_i2c_probe() enables runtime PM before returning successfully, but
anx7411_i2c_remove() tears down the Type-C partner state, workqueue, dummy
I2C device, mux, switch and port without disabling runtime PM.

Use devm_pm_runtime_enable() so runtime PM is disabled automatically on
driver detach. Since devres action registration can fail, route that
failure through the existing probe unwind path.

This issue was identified during our ongoing static-analysis research while
reviewing kernel code.

Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support")
Cc: stable@xxxxxxxxxxxxxxx
Co-developed-by: Ijae Kim <ae878000@xxxxxxxxx>
Signed-off-by: Ijae Kim <ae878000@xxxxxxxxx>
Signed-off-by: Myeonghun Pak <mhun512@xxxxxxxxx>
---
 drivers/usb/typec/anx7411.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c
index 604868ebf422..41df115912b9 100644
--- a/drivers/usb/typec/anx7411.c
+++ b/drivers/usb/typec/anx7411.c
@@ -1537,7 +1537,9 @@ static int anx7411_i2c_probe(struct i2c_client *client)
 	if (anx7411_typec_check_connection(plat))
 		dev_err(dev, "check status\n");
 
-	pm_runtime_enable(dev);
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		goto free_wq;
 
 	return 0;
 
-- 
2.47.1