Re: [PATCH 1/8] dt-bindings: regulator: ROHM BD73800 regulators

[Rob Herring (Arm)]

On Wed, 01 Jul 2026 15:41:11 +0300, Matti Vaittinen wrote:
> From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
> 
> Add bindings for the BUCKs and LDOs on ROHM BD73800. The PMIC state
> specific voltages can be set in same fashion as with a few other ROHM
> PMICs (for example with BD718[15,28,37,47,50,79]). Same properties are
> recycled :)
> 
> The LDOs 1 and 4 can use different voltage ranges depending on the OTP
> configuration.
> 
> Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
> ---
>  .../regulator/rohm,bd73800-regulator.yaml     | 119 ++++++++++++++++++
>  1 file changed, 119 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/rohm,bd73800-pmic.yaml
Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml: Documentation/devicetree/bindings/mfd/rohm,bd73800-pmic.yaml

See https://patchwork.kernel.org/project/devicetree/patch/67b42b5363533f11c22a6421417c3345f9872aec.1782909323.git.mazziesaccount@xxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.