Re: [PATCH v2] iio: imu: fix typos in comments

[Jonathan Cameron]

On Wed,  1 Jul 2026 21:56:59 +0530
Anas Khan <anxkhn28@xxxxxxxxx> wrote:

> Fix several comment misspellings across drivers/iio/imu/, found with
> codespell and manual review. The corrected words are coefficient,
> temperature, sensitivity, access, chosen, and buses.
> 
> Signed-off-by: Anas Khan <anxkhn28@xxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>

Andy can confirm, but generally adding more typo fixes that Andy
has not reviewed would be a reason to drop his RB tag.

Changes look fine, but I'll wait on a reply from Andy to apply
this.

Thanks,

Jonathan

> ---
> v2: expand from the single adis16480 temperature fix (v1) to cover all
>     comment typos in drivers/iio/imu/, as requested by Andy Shevchenko.
>     The Reviewed-by is carried over as the changes remain trivial typo
>     fixes.
>  drivers/iio/imu/adis16480.c                        | 4 ++--
>  drivers/iio/imu/bmi160/bmi160_core.c               | 2 +-
>  drivers/iio/imu/fxos8700_core.c                    | 2 +-
>  drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 2 +-
>  drivers/iio/imu/inv_icm45600/inv_icm45600.h        | 2 +-
>  drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c         | 4 ++--
>  6 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
> index 543d5c4bfb11..c7163540cd02 100644
> --- a/drivers/iio/imu/adis16480.c
> +++ b/drivers/iio/imu/adis16480.c
> @@ -111,7 +111,7 @@
>  
>  #define ADIS16480_REG_SERIAL_NUM		ADIS16480_REG(0x04, 0x20)
>  
> -/* Each filter coefficent bank spans two pages */
> +/* Each filter coefficient bank spans two pages */
>  #define ADIS16480_FIR_COEF(page) (x < 60 ? ADIS16480_REG(page, (x) + 8) : \
>  		ADIS16480_REG((page) + 1, (x) - 60 + 8))
>  #define ADIS16480_FIR_COEF_A(x)			ADIS16480_FIR_COEF(0x05, (x))
> @@ -1468,7 +1468,7 @@ static irqreturn_t adis16480_trigger_handler(int irq, void *p)
>  			 * We need to perform the padding to have the buffer
>  			 * elements naturally aligned in case there are any
>  			 * 32-bit storage size channels enabled which are added
> -			 * in the buffer after the temprature data. In case
> +			 * in the buffer after the temperature data. In case
>  			 * there is no data being added after the temperature
>  			 * data, the padding is harmless.
>  			 */
> diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
> index 4abb83b75e2e..2c0d21eb853a 100644
> --- a/drivers/iio/imu/bmi160/bmi160_core.c
> +++ b/drivers/iio/imu/bmi160/bmi160_core.c
> @@ -5,7 +5,7 @@
>   * Copyright (c) 2016, Intel Corporation.
>   * Copyright (c) 2019, Martin Kelly.
>   *
> - * IIO core driver for BMI160, with support for I2C/SPI busses
> + * IIO core driver for BMI160, with support for I2C/SPI buses
>   *
>   * TODO: magnetometer, hardware FIFO
>   */
> diff --git a/drivers/iio/imu/fxos8700_core.c b/drivers/iio/imu/fxos8700_core.c
> index 281ebfd9c15a..9d2eb6fbab4a 100644
> --- a/drivers/iio/imu/fxos8700_core.c
> +++ b/drivers/iio/imu/fxos8700_core.c
> @@ -2,7 +2,7 @@
>  /*
>   * FXOS8700 - NXP IMU (accelerometer plus magnetometer)
>   *
> - * IIO core driver for FXOS8700, with support for I2C/SPI busses
> + * IIO core driver for FXOS8700, with support for I2C/SPI buses
>   *
>   * TODO: Buffer, trigger, and IRQ support
>   */
> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c
> index 68a395758031..91b7f1ecba55 100644
> --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c
> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c
> @@ -186,7 +186,7 @@ static unsigned int inv_icm42600_wm_truncate(unsigned int watermark,
>   * smallest latency but this is not as simple as choosing the smallest watermark
>   * value. Latency depends on watermark and ODR. It requires several steps:
>   * 1) compute gyro and accel latencies and choose the smallest value.
> - * 2) adapt the choosen latency so that it is a multiple of both gyro and accel
> + * 2) adapt the chosen latency so that it is a multiple of both gyro and accel
>   *    ones. Otherwise it is possible that you don't meet a requirement. (for
>   *    example with gyro @100Hz wm 4 and accel @100Hz with wm 6, choosing the
>   *    value of 4 will not meet accel latency requirement because 6 is not a
> diff --git a/drivers/iio/imu/inv_icm45600/inv_icm45600.h b/drivers/iio/imu/inv_icm45600/inv_icm45600.h
> index 1c796d4b2a40..95fa934a42b4 100644
> --- a/drivers/iio/imu/inv_icm45600/inv_icm45600.h
> +++ b/drivers/iio/imu/inv_icm45600/inv_icm45600.h
> @@ -190,7 +190,7 @@ struct inv_icm45600_sensor_state {
>  #define INV_ICM45600_REG_IREG_ADDR			0x7C
>  #define INV_ICM45600_REG_IREG_DATA			0x7E
>  
> -/* Direct acces registers */
> +/* Direct access registers */
>  #define INV_ICM45600_REG_MISC2				0x007F
>  #define INV_ICM45600_MISC2_SOFT_RESET			BIT(1)
>  
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
> index 47394594d17a..6b858fdfd1c6 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
> @@ -106,9 +106,9 @@ static int inv_magn_init(struct inv_mpu6050_state *st)
>  		return ret;
>  
>  	/*
> -	 * Sensor sentivity
> +	 * Sensor sensitivity
>  	 * 1 uT = 0.01 G and value is in micron (1e6)
> -	 * sensitvity = x uT * 0.01 * 1e6
> +	 * sensitivity = x uT * 0.01 * 1e6
>  	 */
>  	switch (st->chip_type) {
>  	case INV_MPU9150: