[PATCH v3 0/2] upboard pinctrl support for device id INTC1055

[GaryWang]

Add missing groups and functions in Tigerlake's pinctrl driver for INTC1055.
Add support "UP Xtreme i12" board.

The pinctrl-upboard is provide additional driving power & pin mux function
 through native SOC pins -> FPGA/CPLD -> hat  pins for flexable board level
 applications. it's probe from ACPI device id AANT0F01 & AANT0F04.

Signed-off-by: GaryWang <is0124@xxxxxxxxx>
---
Changes in v3:
- Correction pwm & uart pin mode in INTC1055.
- Remove unsupport up boards.
- Update cover letter.
- Link to v2: https://lore.kernel.org/r/20260612-upboard-pinctrl-add-upboard-intc1055-support-v2-0-4111b256c840@xxxxxxxxx

Changes in v2:
- Add brief introduction pinctrl-upboard architecture in cover content. 
- Add more detail explaining for pinctrl-tigerlake commit message.
- Link to v1: https://lore.kernel.org/r/20260610-upboard-pinctrl-add-upboard-intc1055-support-v1-0-8185d2abbfb1@xxxxxxxxx

---
GaryWang (2):
      pinctrl: tigerlake: add some pin groups and functions for INTC1055
      pinctrl: upboard: add device id INTC1055 based UP boards support

 drivers/pinctrl/intel/pinctrl-tigerlake.c | 32 +++++++++++++++++++++++++++++++
 drivers/pinctrl/pinctrl-upboard.c         | 21 ++++++++++++++++++++
 2 files changed, 53 insertions(+)
---
base-commit: dc59e4fea9d83f03bad6bddf3fa2e52491777482
change-id: 20260609-upboard-pinctrl-add-upboard-intc1055-support-bd1d81311b7a

Best regards,
-- 
GaryWang <is0124@xxxxxxxxx>