[PATCH 1/2] ARM: dts: ti/omap: embt2ws: use mulit-led for RGB LED

[Andreas Kemnade]

The device has one single RGB LED. Explicitly declare it as such
by combing the LEDs into one.

Suggested-by: Pavel Machek <pavel@xxxxxx>
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
index e253e0775ea9..e11d1931c42a 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
@@ -64,6 +64,13 @@ key-lock {
 		};
 	};
 
+	multi-led {
+		compatible = "leds-group-multicolor";
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+		leds = <&led_r>, <&led_g>, <&led_b>;
+	};
+
 	cb_v18: regulator-cb-v18 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&cb_v18_pins>;
@@ -368,19 +375,19 @@ led-controller@66 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		led@0 {
+		led_g: led@0 {
 			reg = <0>;
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_STATUS;
 		};
 
-		led@2 {
+		led_b: led@2 {
 			reg = <2>;
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_STATUS;
 		};
 
-		led@4 {
+		led_r: led@4 {
 			reg = <4>;
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;

-- 
2.47.3