Re: [PATCH v5 01/14] dt-bindings: leds: Document TI LM3533 LED controller

[Johan Hovold]

On Wed, Jun 17, 2026 at 11:00:18AM +0300, Svyatoslav Ryhel wrote:
> Document the LM3533 - a complete power source for backlight, keypad and
> indicator LEDs in smartphone handsets. The high-voltage inductive boost
> converter provides the power for two series LED strings display backlight
> and keypad functions.
> 
> Signed-off-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
> Reviewed-by: Jonathan Cameron <jic23@xxxxxxxxxx> #for light sensor
> Reviewed-by: Daniel Thompson (RISCstar) <danielt@xxxxxxxxxx> #for backlight
> Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>

> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        led-controller@36 {
> +            compatible = "ti,lm3533";
> +            reg = <0x36>;
> +
> +            enable-gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
> +            vin-supply = <&vdd_3v3_bat>;
> +
> +            ti,boost-ovp-microvolt = <24000000>;
> +            ti,boost-freq-hz = <500000>;
> +
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            backlight@0 {
> +                compatible = "ti,lm3533-backlight";
> +                reg = <0>;
> +
> +                default-brightness = <113>;
> +
> +                led-max-microamp = <23400>;
> +                led-sources = <0 1>;
> +            };
> +
> +            led@2 {
> +                compatible = "ti,lm3533-leds";
> +                reg = <2>;
> +
> +                led-max-microamp = <23400>;
> +                led-sources = <0 1>;
> +            };
> +
> +            led@4 {
> +                compatible = "ti,lm3533-leds";
> +                reg = <4>;
> +
> +                led-max-microamp = <23400>;
> +                led-sources = <2>;
> +            };
> +
> +            led@5 {
> +                compatible = "ti,lm3533-leds";
> +                reg = <5>;
> +
> +                led-max-microamp = <23400>;
> +                led-sources = <3 4>;
> +            };
> +
> +            light-sensor {

Doesn't the binding (or dts) checker complain about this node not having
an address?

> +                compatible = "ti,lm3533-als";
> +
> +                interrupt-parent = <&gpio>;
> +                interrupts = <80 IRQ_TYPE_LEVEL_LOW>;
> +
> +                ti,pwm-mode;
> +            };
> +        };
> +    };
> +...

Johan