[PATCH 6/7] media: qcom: camss: Switch on ICP and BPS as make options

[Bryan O'Donoghue]

Signed-off-by: Bryan O'Donoghue <bod@xxxxxxxxxx>
---
 drivers/media/platform/qcom/camss/Kconfig  | 24 ++++++++++++++++++++++++
 drivers/media/platform/qcom/camss/Makefile |  8 ++++++++
 2 files changed, 32 insertions(+)

diff --git a/drivers/media/platform/qcom/camss/Kconfig b/drivers/media/platform/qcom/camss/Kconfig
index 1edc5e5a1829e..d62d5f6b383f8 100644
--- a/drivers/media/platform/qcom/camss/Kconfig
+++ b/drivers/media/platform/qcom/camss/Kconfig
@@ -8,3 +8,27 @@ config VIDEO_QCOM_CAMSS
 	select VIDEOBUF2_DMA_SG
 	select V4L2_FWNODE
 	select PHY_QCOM_MIPI_CSI2
+
+config VIDEO_QCOM_CAMSS_HARD_ISP
+	tristate "Qualcomm CAMSS Hardware ISP (ICP/IPE/BPS)"
+	depends on VIDEO_QCOM_CAMSS
+	depends on QCOM_MDT_LOADER
+	depends on QCOM_SCM
+	depends on VIDEO_DEV
+	select VIDEOBUF2_DMA_CONTIG
+	select V4L2_MEM2MEM_DEV
+	help
+	  Enable support for the hardware ISP found in Qualcomm camera
+	  subsystems on SoCs like X1E80100. This includes:
+
+	  - ICP (Image Control Processor): Tensilica LX7 that runs
+	    camera firmware and provides HFI interface
+	  - IPE (Image Processing Engine): V4L2 m2m device for noise
+	    reduction, sharpening, and scaling
+	  - BPS (Bayer Processing Segment): V4L2 m2m device for
+	    demosaicing raw Bayer data
+
+	  If unsure, say N.
+
+	  To compile this as modules, choose M here. The modules will
+	  be called camss-icp, camss-ipe, and camss-bps, respecitvely.
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 5e349b4915130..940af23da5675 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -29,3 +29,11 @@ qcom-camss-objs += \
 		camss-format.o \
 
 obj-$(CONFIG_VIDEO_QCOM_CAMSS) += qcom-camss.o
+
+qcom-camss-icp-objs += camss-icp.o \
+		       camss-icp-hfi.o
+obj-$(CONFIG_VIDEO_QCOM_CAMSS_HARD_ISP) += qcom-camss-icp.o
+
+qcom-camss-bps-objs += camss-bps.o \
+		       camss-bps-cmd.o
+obj-$(CONFIG_VIDEO_QCOM_CAMSS_HARD_ISP) += qcom-camss-bps.o

-- 
2.54.0