Re: (subset) [PATCH 0/3] arm64: dts: qcom: eliza-evk: Enable PCIe0 and PCIe1 with M.2 and TC9563 switch

[Bartosz Golaszewski]

On Fri, 03 Jul 2026 18:08:29 +0530, Krishna Chaitanya Chundru wrote:
> This series enables PCIe for the Eliza EVK board (CQS SoM on EVK carrier).
> 
> The Eliza EVK exposes two PCIe ports:
> 
> - PCIe0 drives an M.2 E key connector. The 3.3V supply is GPIO-controlled
>   via a TCA9538 I/O expander on I2C4. The slot hosts a WLAN module
>   (connected over PCIe) and a Bluetooth device (connected over UART5),
>   modelled with the pcie-m2-e-connector binding.
> 
> [...]

Applied, thanks!

[3/3] power: sequencing: pwrseq-pcie-m2: Add QCC2072 BT PCI device ID
      https://git.kernel.org/brgl/c/162ea02941a936f8899f3dbe10607b1d5af1b07b

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxxxxxxxx>