[PATCH] ARM: dts: aspeed: Correct indentation
From: Krzysztof Kozlowski
Date: Mon Jul 06 2026 - 08:23:41 EST
Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
---
Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
---
.../aspeed-bmc-inventec-transformers.dts | 200 +++++++++---------
.../boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts | 2 +-
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 2 +-
3 files changed, 102 insertions(+), 102 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
index c713cb7a6187..e51c726b4a55 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -13,33 +13,33 @@ / {
compatible = "inventec,transformer-bmc", "aspeed,ast2600";
aliases {
- serial4 = &uart5;
+ serial4 = &uart5;
};
chosen {
- stdout-path = &uart5;
- bootargs = "console=ttyS4,115200n8";
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200n8";
};
memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x80000000>;
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
};
leds {
- compatible = "gpio-leds";
+ compatible = "gpio-leds";
- // UID led
- uid {
- label = "UID_LED";
- gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
- };
+ // UID led
+ uid {
+ label = "UID_LED";
+ gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+ };
- // Heart beat led
- heartbeat {
- label = "HB_LED";
- gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
- };
+ // Heart beat led
+ heartbeat {
+ label = "HB_LED";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ };
};
};
@@ -47,8 +47,8 @@ &mdio0 {
status = "okay";
ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
};
};
@@ -64,22 +64,22 @@ &fmc {
status = "okay";
flash@0 {
- status = "okay";
- m25p,fast-read;
- label = "bmc";
- spi-max-frequency = <33000000>;
- spi-tx-bus-width = <2>;
- spi-rx-bus-width = <2>;
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <33000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
#include "openbmc-flash-layout.dtsi"
};
flash@1 {
- status = "okay";
- m25p,fast-read;
- label = "bmc2";
- spi-max-frequency = <33000000>;
- spi-tx-bus-width = <2>;
- spi-rx-bus-width = <2>;
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc2";
+ spi-max-frequency = <33000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
};
};
@@ -89,12 +89,12 @@ &spi1 {
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
- status = "okay";
- m25p,fast-read;
- label = "bios";
- spi-max-frequency = <33000000>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <1>;
+ status = "okay";
+ m25p,fast-read;
+ label = "bios";
+ spi-max-frequency = <33000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
};
};
@@ -115,9 +115,9 @@ &i2c0 {
//Set bmc' slave address;
bmc_slave@10 {
- compatible = "ipmb-dev";
- reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
- i2c-protocol;
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
};
};
@@ -129,9 +129,9 @@ &i2c3 {
// FRU AT24C512C-SSHM-T
status = "okay";
eeprom@50 {
- compatible = "atmel,24c512";
- reg = <0x50>;
- pagesize = <128>;
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ pagesize = <128>;
};
};
@@ -143,26 +143,26 @@ &i2c6 {
status = "okay";
tmp75@49 {
- compatible = "ti,tmp75";
- reg = <0x49>;
+ compatible = "ti,tmp75";
+ reg = <0x49>;
};
tmp75@4f {
- compatible = "ti,tmp75";
- reg = <0x4f>;
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
};
tmp468@48 {
- compatible = "ti,tmp468";
- reg = <0x48>;
+ compatible = "ti,tmp468";
+ reg = <0x48>;
};
};
&i2c7 {
status = "okay";
adm1278@40 {
- compatible = "adi,adm1278";
- reg = <0x40>;
+ compatible = "adi,adm1278";
+ reg = <0x40>;
};
};
@@ -172,15 +172,15 @@ &i2c8 {
status = "okay";
eeprom@51 {
- compatible = "atmel,24c512";
- reg = <0x51>;
- pagesize = <128>;
+ compatible = "atmel,24c512";
+ reg = <0x51>;
+ pagesize = <128>;
};
eeprom@53 {
- compatible = "atmel,24c512";
- reg = <0x53>;
- pagesize = <128>;
+ compatible = "atmel,24c512";
+ reg = <0x53>;
+ pagesize = <128>;
};
};
@@ -194,17 +194,17 @@ &i2c10 {
status = "okay";
i2c-mux@71 {
- compatible = "nxp,pca9544";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x71>;
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
};
i2c-mux@73 {
- compatible = "nxp,pca9544";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x73>;
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
};
};
@@ -213,46 +213,46 @@ &i2c11 {
status = "okay";
i2c-mux@70 {
- compatible = "nxp,pca9544";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
- pcie_eeprom_riser1: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
+ pcie_eeprom_riser1: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
- eeprom@55 {
- compatible = "atmel,24c512";
- reg = <0x55>;
- pagesize = <128>;
- };
- };
+ eeprom@55 {
+ compatible = "atmel,24c512";
+ reg = <0x55>;
+ pagesize = <128>;
+ };
+ };
- pcie_eeprom_riser2: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
+ pcie_eeprom_riser2: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
- eeprom@55 {
- compatible = "atmel,24c512";
- reg = <0x55>;
- pagesize = <128>;
- };
- };
+ eeprom@55 {
+ compatible = "atmel,24c512";
+ reg = <0x55>;
+ pagesize = <128>;
+ };
+ };
- pcie_eeprom_riser3: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
+ pcie_eeprom_riser3: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
- eeprom@55 {
- compatible = "atmel,24c512";
- reg = <0x55>;
- pagesize = <128>;
- };
- };
+ eeprom@55 {
+ compatible = "atmel,24c512";
+ reg = <0x55>;
+ pagesize = <128>;
+ };
+ };
};
};
@@ -260,8 +260,8 @@ &i2c12 {
status = "okay";
psu0:psu0@58 {
- compatible = "pmbus";
- reg = <0x58>;
+ compatible = "pmbus";
+ reg = <0x58>;
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
index 8a7fb55ab489..5a3e8a3941d4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
@@ -82,7 +82,7 @@ &fmc {
flash@0 {
status = "okay";
m25p,fast-read;
- label = "bmc";
+ label = "bmc";
#include "openbmc-flash-layout.dtsi"
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 56bb3b0444f7..edf4b74f5aba 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -517,7 +517,7 @@ timer: timer@1e782000 {
clocks = <&syscon ASPEED_CLK_APB1>;
clock-names = "PCLK";
status = "disabled";
- };
+ };
uart1: serial@1e783000 {
compatible = "ns16550a";
--
2.53.0