Re: [PATCH v1] PCI: imx6: Fix i.MX6Q/DL boot hang by separating PHY power and reference clock control

From: Soeren Moch

Date: Mon Jul 06 2026 - 12:23:12 EST




On 06.07.26 05:06, hongxing.zhu@xxxxxxxxxxx wrote:
From: Richard Zhu <hongxing.zhu@xxxxxxx>

Commit 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling regulators")
introduced a boot hang on i.MX6Q/DL variants by changing the initialization
sequence.

The issue stems from coupling PHY power (TEST_PD) and reference clock
(REF_CLK_EN) control in imx6q_pcie_enable_ref_clk(). When these are
managed together, the timing between PHY power-up and reference clock
enablement cannot be properly controlled, leading to initialization
failures.

Fix this by separating the two concerns:

- Move PHY power control (TEST_PD) to imx6q_pcie_core_reset() where it
logically belongs with reset operations. This ensures PHY power state
is managed as part of the core reset sequence.

- Update imx6qp_pcie_core_reset() to call imx6q_pcie_core_reset() for
shared PHY power management, avoiding code duplication.

- Make imx6q_pcie_enable_ref_clk() responsible only for reference clock
(REF_CLK_EN) control, simplifying its purpose.

- Remove the 10us delay workaround from imx6q_pcie_enable_ref_clk() as
proper sequencing is now handled by the core_reset functions.

This refactoring ensures PHY power is controlled during reset
operations, fixing the boot hang while improving code maintainability.

Fixes: 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling regulators")
Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
With this patch on top of v7.2-rc2 I see everything booting, lspci shows
the root complex, but no PCIe device behind it.
Tested on a i.MX6Q based tbs2910 board.

For me it is not clear whether this fail to detect PCIe devices is related
to the patches in question, the reset timing, or something else. Needs
further investigation.

Regards,
Soeren
---
drivers/pci/controller/dwc/pci-imx6.c | 43 +++++++++++----------------
1 file changed, 18 insertions(+), 25 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index ea0b4eb03c1d0..6924a06bde305 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -680,21 +680,12 @@ static int imx_pcie_attach_pd(struct device *dev)
static int imx6q_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
{
- if (enable) {
- /* power up core phy and enable ref clock */
- regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD);
- /*
- * The async reset input need ref clock to sync internally,
- * when the ref clock comes after reset, internal synced
- * reset time is too short, cannot meet the requirement.
- * Add a ~10us delay here.
- */
- usleep_range(10, 100);
- regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN);
- } else {
- regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN);
- regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD);
- }
+ if (enable)
+ regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_REF_CLK_EN);
+ else
+ regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_REF_CLK_EN);
return 0;
}
@@ -823,23 +814,25 @@ static int imx6sx_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
return 0;
}
-static int imx6qp_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+static int imx6q_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
{
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_SW_RST,
- assert ? IMX6Q_GPR1_PCIE_SW_RST : 0);
- if (!assert)
- usleep_range(200, 500);
+ if (assert)
+ regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_TEST_PD);
+ else
+ regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_TEST_PD);
return 0;
}
-static int imx6q_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+static int imx6qp_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
{
+ imx6q_pcie_core_reset(imx_pcie, assert);
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_SW_RST,
+ assert ? IMX6Q_GPR1_PCIE_SW_RST : 0);
if (!assert)
- return 0;
-
- regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD);
- regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN);
+ usleep_range(200, 500);
return 0;
}