[PATCH v7 8/9] arm64: dts: qcom: monaco: Enable CDSP cooling

[Gaurav Kohli]

Unlike the CPU, the CDSP does not throttle its speed automatically
when it reaches high temperatures in monaco.

Set up CDSP cooling by throttling the cdsp, when it reaches 115°C.

Add polling-delay-passive so the governor periodically evaluates
the zone during passive cooling and steps up cooling levels when
temperature stabilizes below the next trip.

Reviewed-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
Signed-off-by: Gaurav Kohli <gaurav.kohli@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/monaco.dtsi | 99 ++++++++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
index 64fc0d592282..3f388c000fbb 100644
--- a/arch/arm64/boot/dts/qcom/monaco.dtsi
+++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
@@ -22,6 +22,7 @@
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/qcom,pas.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -7738,6 +7739,8 @@ remoteproc_cdsp: remoteproc@26300000 {
 			qcom,smem-states = <&smp2p_cdsp_out 0>;
 			qcom,smem-state-names = "stop";
 
+			#cooling-cells = <3>;
+
 			status = "disabled";
 
 			glink-edge {
@@ -8170,39 +8173,87 @@ cpu-critical {
 		};
 
 		nsp-0-0-0-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens2 5>;
 
 			trips {
+				nsp_0_0_0_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_0_0_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-1-0-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
+				nsp_0_1_0_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_1_0_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-2-0-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
+				nsp_0_2_0_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_2_0_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		ddrss-0-thermal {
@@ -8290,39 +8341,87 @@ cpu-critical {
 		};
 
 		nsp-0-0-1-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens3 5>;
 
 			trips {
+				nsp_0_0_1_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_0_1_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-1-1-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens3 6>;
 
 			trips {
+				nsp_0_1_1_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_1_1_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-2-1-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens3 7>;
 
 			trips {
+				nsp_0_2_1_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_2_1_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		ddrss-1-thermal {

-- 
2.34.1