[PATCH v3 3/3] arm64: dts: qcom: x1e80100-dell-xps13-9345: introduce EC

[Aleksandrs Vinarskis]

Describe embedded controller, its interrupt and required thermal zones.
Add EC's reset GPIO to reserved range, as triggering it during device
operation leads to unrecoverable and unusable state.

Signed-off-by: Aleksandrs Vinarskis <alex@xxxxxxxxxxxxx>
---
 .../boot/dts/qcom/x1e80100-dell-xps13-9345.dts     | 86 +++++++++++++++++++++-
 1 file changed, 84 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
index ce7b10ea89b6..8d8d8014049b 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
@@ -759,8 +759,32 @@ retimer_ss0_con_sbu_out: endpoint {
 
 &i2c5 {
 	clock-frequency = <100000>;
-	status = "disabled";
-	/* EC @0x3b */
+	status = "okay";
+
+	embedded-controller@3b {
+		compatible = "dell,xps13-9345-ec";
+		reg = <0x3b>;
+
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ec_int_n_default>;
+		pinctrl-names = "default";
+
+		io-channels = <&pmk8550_vadc ADC5_GEN3_AMUX3_GPIO_100K_PU(1)>,
+			      <&pmk8550_vadc ADC5_GEN3_AMUX4_GPIO_100K_PU(1)>,
+			      <&pmk8550_vadc ADC5_GEN3_AMUX1_THM_100K_PU(1)>,
+			      <&pmk8550_vadc ADC5_GEN3_AMUX2_THM_100K_PU(1)>,
+			      <&pmk8550_vadc ADC5_GEN3_AMUX3_THM_100K_PU(1)>,
+			      <&pmk8550_vadc ADC5_GEN3_AMUX4_THM_100K_PU(1)>,
+			      <&pmk8550_vadc ADC5_GEN3_AMUX5_THM_100K_PU(1)>;
+		io-channel-names = "sys_therm0",
+				   "sys_therm1",
+				   "sys_therm2",
+				   "sys_therm3",
+				   "sys_therm4",
+				   "sys_therm5",
+				   "sys_therm6";
+	};
 };
 
 &i2c7 {
@@ -1025,6 +1049,57 @@ rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
 	};
 };
 
+&pmk8550_vadc {
+	sys_therm0: channel@14c {
+		reg = <ADC5_GEN3_AMUX3_GPIO_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "lpddr5_therm";
+	};
+
+	sys_therm1: channel@14d {
+		reg = <ADC5_GEN3_AMUX4_GPIO_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "usb_charger_left_therm";
+	};
+
+	sys_therm2: channel@144 {
+		reg = <ADC5_GEN3_AMUX1_THM_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "vph_pwr_therm";
+	};
+
+	sys_therm3: channel@145 {
+		reg = <ADC5_GEN3_AMUX2_THM_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "usb_charger_right_therm";
+	};
+
+	sys_therm4: channel@146 {
+		reg = <ADC5_GEN3_AMUX3_THM_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "ssd_conn_therm";
+	};
+
+	sys_therm5: channel@147 {
+		reg = <ADC5_GEN3_AMUX4_THM_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm5";
+	};
+
+	sys_therm6: channel@148 {
+		reg = <ADC5_GEN3_AMUX5_THM_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "keyboard_therm";
+	};
+};
+
 &qupv3_0 {
 	status = "okay";
 };
@@ -1071,6 +1146,7 @@ &smb2360_1_eusb2_repeater {
 
 &tlmm {
 	gpio-reserved-ranges = <44 4>,  /* SPI11 (TPM) */
+			       <65 1>,  /* EC Reset, accessible but yields system unusable */
 			       <76 4>,  /* SPI19 (TZ Protected) */
 			       <238 1>; /* UFS Reset */
 
@@ -1081,6 +1157,12 @@ cam_indicator_en: cam-indicator-en-state {
 		bias-disable;
 	};
 
+	ec_int_n_default: ec-int-n-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+	};
+
 	edp_bl_en: edp-bl-en-state {
 		pins = "gpio74";
 		function = "gpio";

-- 
2.54.0