Re: [PATCH v2 3/3] iio: light: gp2ap002: Fix regulator leaks in runtime resume error path

[Jonathan Cameron]

On Wed, 22 Jul 2026 21:52:47 +0530
Nikhil Gautam <nikhilgtr@xxxxxxxxx> wrote:

> If enabling vio fails, vdd is left enabled; if re-initializing the
> sensor fails, both regulators are left enabled.
> 
> unwind previously enabled regulators on failure, mirroring the error
> handling already used in probe.
> 
> Fixes: 97d642e23037c ("iio: light: Add a driver for Sharp GP2AP002x00F")
> Signed-off-by: Nikhil Gautam <nikhilgtr@xxxxxxxxx>
I'm already carrying this fix via a patch from Laxman,
so dropping this one.


Applied 1 and 2 but there was some noise due to other changes near this
code so please take a look.

Applied to the fixes-togreg branch of iio.git

Thanks

Jonathan

> ---
>  drivers/iio/light/gp2ap002.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/light/gp2ap002.c b/drivers/iio/light/gp2ap002.c
> index e8ba9c00dabb..430336b51f83 100644
> --- a/drivers/iio/light/gp2ap002.c
> +++ b/drivers/iio/light/gp2ap002.c
> @@ -677,7 +677,7 @@ static int gp2ap002_runtime_resume(struct device *dev)
>  	ret = regulator_enable(gp2ap002->vio);
>  	if (ret) {
>  		dev_err(dev, "failed to enable VIO regulator in resume path\n");
> -		return ret;
> +		goto out_disable_vdd;
>  	}
>  
>  	msleep(20);
> @@ -685,13 +685,19 @@ static int gp2ap002_runtime_resume(struct device *dev)
>  	ret = gp2ap002_init(gp2ap002);
>  	if (ret) {
>  		dev_err(dev, "re-initialization failed\n");
> -		return ret;
> +		goto out_disable_vio;
>  	}
>  
>  	/* Re-activate the IRQ */
>  	enable_irq(gp2ap002->irq);
>  
>  	return 0;
> +
> +out_disable_vio:
> +	regulator_disable(gp2ap002->vio);
> +out_disable_vdd:
> +	regulator_disable(gp2ap002->vdd);
> +	return ret;
>  }
>  
>  static DEFINE_RUNTIME_DEV_PM_OPS(gp2ap002_dev_pm_ops, gp2ap002_runtime_suspend,