[PATCH 24/28] arm64: dts: qcom: glymur: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies

[Manivannan Sadhasivam via B4 Relay]

From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>

The QMP PHY expects the vdda-phy supply to be the lower voltage (~0.8V)
and the vdda-pll supply to be the higher voltage (~1.2V), as used by the
DisplayPort QMP PHY on this SoC. But these two supplies are swapped for
the USB QMP PHYs on this board, feeding 1.2V to vdda-phy and 0.72V/0.83V
to vdda-pll.

Fix it by swapping the two supplies back.

Fixes: c8b63029455b ("arm64: dts: qcom: glymur-crd: Enable USB support")
Reported-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dts | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index c98dfb3941fa..9d42bd858595 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -339,8 +339,8 @@ &usb_0_hsphy {
 };
 
 &usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
-	vdda-pll-supply = <&vreg_l3f_e0_0p72>;
+	vdda-phy-supply = <&vreg_l3f_e0_0p72>;
+	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
 	refgen-supply = <&vreg_l2f_e0_0p82>;
 
 	status = "okay";
@@ -368,8 +368,8 @@ &usb_1_hsphy {
 };
 
 &usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
-	vdda-pll-supply = <&vreg_l1h_e0_0p89>;
+	vdda-phy-supply = <&vreg_l1h_e0_0p89>;
+	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
 	refgen-supply = <&vreg_l2f_e0_0p82>;
 
 	status = "okay";
@@ -413,16 +413,16 @@ &usb_mp_hsphy1 {
 };
 
 &usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
-	vdda-pll-supply = <&vreg_l2h_e0_0p72>;
+	vdda-phy-supply = <&vreg_l2h_e0_0p72>;
+	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
 	refgen-supply = <&vreg_l4f_e1_1p08>;
 
 	status = "okay";
 };
 
 &usb_mp_qmpphy1 {
-	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
-	vdda-pll-supply = <&vreg_l2h_e0_0p72>;
+	vdda-phy-supply = <&vreg_l2h_e0_0p72>;
+	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
 	refgen-supply = <&vreg_l4f_e1_1p08>;
 
 	status = "okay";

-- 
2.43.0