Re: [PATCH v6 3/3] arm64: dts: qcom: sm8250: Add JPEG encoder node

[Dmitry Baryshkov]

On Thu, Jul 30, 2026 at 09:02:26PM +0300, Atanas Filipov wrote:
> On 7/30/2026 7:01 PM, Dmitry Baryshkov wrote:
> > On Thu, Jul 30, 2026 at 06:05:24PM +0300, Atanas Filipov wrote:
> > > Add the JPEG encoder hardware node to the SM8250 device tree so the
> > > qcom-jpeg V4L2 encoder driver can bind and operate on this platform.
> > > 
> > > Signed-off-by: Atanas Filipov <atanas.filipov@xxxxxxxxxxxxxxxx>
> > > ---
> > >   arch/arm64/boot/dts/qcom/sm8250.dtsi | 72 ++++++++++++++++++++++++++++
> > >   1 file changed, 72 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > index f11da2ca4181..d42b29419320 100644
> > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > @@ -13,6 +13,7 @@
> > >   #include <dt-bindings/firmware/qcom,scm.h>
> > >   #include <dt-bindings/gpio/gpio.h>
> > >   #include <dt-bindings/interconnect/qcom,osm-l3.h>
> > > +#include <dt-bindings/interconnect/qcom,icc.h>
> > >   #include <dt-bindings/interconnect/qcom,sm8250.h>
> > >   #include <dt-bindings/mailbox/qcom-ipcc.h>
> > >   #include <dt-bindings/phy/phy-qcom-qmp.h>
> > > @@ -4486,6 +4487,77 @@ cci1_i2c1: i2c-bus@1 {
> > >   			};
> > >   		};
> > > +		jpeg-encoder@ac53000 {
> > > +			compatible = "qcom,sm8250-jpeg-enc";
> > > +			status = "disabled";
> > > +
> > > +			reg = <0x0 0x0ac53000 0x0 0x1000>;
> > > +
> > > +			interrupts = <GIC_SPI 474 IRQ_TYPE_EDGE_RISING>;
> > > +
> > > +			power-domains = <&camcc TITAN_TOP_GDSC>,
> > > +					<&rpmhpd RPMHPD_MMCX>,
> > 
> > Is TITAN_TOP a part of the MMCX or CX domain? In the former case,
> > please drop separate mmcx vote here and let it come through the
> > titan_top (it might require camcc driver and node modifications).
> > 
> 
> The change was requested by Brian, most likely in connection with upcoming
> migrations. I think he would be able to explain the exact reasons. As far as
> the facts are concerned, this is not currently necessary for the driver to
> be functional.

There is no word _driver_ in the _dt bindings_. What is the actual
hardware wrapping? What is being powered by which domain? Is MMCX
directly powering something? Or is it gated by TITAN_TOP_GDSC? I assume
that MX is powering on PLLs, correct?

> > > +
> > > +				opp-100000000 {
> > > +					opp-hz = /bits/ 64 <400000000>,
> > > +						 /bits/ 64 <100000000>;
> > > +					required-opps = <&rpmhpd_opp_min_svs>;
> > 
> > This looks a bit strange. Are you sure that PLL levels match the MMCX /
> > internal clock levels? I think you need to vote on both domains.

This is not addressed / responded.

> > 
> > > +				};
> > > +
> > > +				opp-200000000 {
> > > +					opp-hz = /bits/ 64 <400000000>,
> > > +						 /bits/ 64 <200000000>;
> > > +					required-opps = <&rpmhpd_opp_low_svs>;
> > > +				};
> > > +

-- 
With best wishes
Dmitry