[PATCH 3/3] riscv: dts: spacemit: orangepi-r2s: Add cpu scaling for K1 SoC

[Andre Heider]

From: Jonatan Hazell <jonatanh@xxxxxxxxxxx>

Enable CPU DVFS on OrangePi R2S by including the shared K1 OPP tables
and wiring the CPU cores to the P1 PMIC's buck1 rail.

This mirrors the existing cpu-scaling support for the Banana Pi BPI-F3
and OrangePi RV2. Tested on the R2S hardware.

Signed-off-by: Jonatan Hazell <jonatanh@xxxxxxxxxxx>
---
 .../boot/dts/spacemit/k1-orangepi-r2s.dts     | 35 ++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
index 2d1ba34cb00e..6ebd4334410e 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "k1.dtsi"
+#include "k1-opp.dtsi"
 #include "k1-pinctrl.dtsi"
 
 / {
@@ -50,6 +51,38 @@ vcc5v0_usb: regulator-vcc5v0-usb {
 	};
 };
 
+&cpu_0 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_1 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_2 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_3 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_4 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_5 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_6 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_7 {
+	cpu-supply = <&buck1_0v9>;
+};
+
 &combo_phy {
 	status = "okay";
 };
@@ -132,7 +165,7 @@ pmic@41 {
 		dldoin2-supply = <&buck5>;
 
 		regulators {
-			buck1 {
+			buck1_0v9: buck1 {
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
-- 
2.53.0