Re: [PATCH v3] drm/tyr: add Job IRQ handling

[Laura Nao]

Hello,

On 8/4/26 14:23, Link Mauve wrote:
> Hi,
>
> On Mon, Aug 03, 2026 at 03:34:37PM +0200, Laura Nao wrote:
>> Add a threaded IRQ wrapper for Tyr interrupt sources and use it to
>> handle the firmware Job IRQ.
>>
>> The Job IRQ reports requests from the CSF firmware, including global
>> interface requests and CSG attention bits. Only the GLB bit is currently
>> handled, as it will be used to check firmware readiness. CSG bits
>> handling will be added at a later stage. Add a Job IRQ handler that
>> masks the interrupt in the primary IRQ handler, processes pending raw
>> status in the threaded handler, clears the handled bit, and reenables
>> the mask before returning.
>> Add a wait queue and a bool flag so the handler can signal firmware
>> readiness when the GLB bit is set.
> […]
>> diff --git a/drivers/gpu/drm/tyr/fw/irq.rs b/drivers/gpu/drm/tyr/fw/irq.rs
>> new file mode 100644
>> index 000000000000..6eeb1399a7b3
>> --- /dev/null
>> +++ b/drivers/gpu/drm/tyr/fw/irq.rs
>> @@ -0,0 +1,105 @@
> […]
>> +/// Requests a threaded IRQ registration for the Job IRQ.
>> +///
>> +/// # Safety
>> +///
>> +/// Callers must not `mem::forget()` the resulting registration or otherwise prevent its
>> +/// [`Drop`] implementation from running.
>> +pub(crate) unsafe fn job_irq_init<'a>(
>> +    pdev: &'a platform::Device<Bound>,
>> +    iomem: Arc<IoMem<'a>>,
>> +    fw_ready: Arc<AtomicBool>,
>> +    job_irq_wait: Arc<WaitQueue>,
>> +) -> Result<impl PinInit<ThreadedRegistration<'a, TyrIrq<JobIrq<'a>>>, Error> + 'a> {
>> +    iomem.write_reg(JOB_IRQ_MASK::zeroed().with_glb(true));
>> +    let job_irq = JobIrq {
>> +        iomem: iomem.clone(),
>> +        fw_ready,
>> +        job_irq_wait,
>> +    };
>> +    // SAFETY: The caller guarantees the resulting registration will not be leaked.
>> +    unsafe { TyrIrq::request(pdev, c_str!("job"), job_irq) }
>
> Nowadays we use the shorter c"job" way of creating a &CStr, and I think
> the macro will even generate warnings in some configurations (perhaps
> CLIPPY=1?).
>

Got it, I didn't get the warning with CLIPPY=1, I'll double check my
configuration. 

I'll fix this in the next revision. Thanks for the heads up!

Best,

Laura