Re: (subset) [PATCH 0/3] arm64: dts: imx95-15x15-frdm: support CAN transceivers sharing a silent GPIO

[Vinod Koul]

On Thu, 30 Jul 2026 12:33:25 +0800, haibo.chen@xxxxxxxxxxx wrote:
> On the i.MX95 15x15 FRDM board the two CAN transceivers (attached to
> flexcan2 and flexcan5) share a single "silent" control pin, which is
> routed through the on-board PCAL6524 GPIO expander. Both transceiver PHY
> nodes therefore reference the same GPIO line for their silent-gpios
> property.
> 
> This series makes that sharing work correctly and puts the transceivers
> into the proper default state:
> 
> [...]

Applied, thanks!

[1/3] phy: phy-can-transceiver: default silent GPIO to high during probe
      commit: c3b0bb15ef001703b00d79bc4928e7421e24280d

Best regards,
-- 
~Vinod