[PATCH v11 10/37] pinctrl: airoha: fix I2C1 pin mux config for AN7581

[Mikhail Kshevetskiy]

From: Daniel Schwierzeck <daniel.schwierzeck@xxxxxxxxx>

The pin mux on GPIOs 1 and 2 on AN7581 supports I2C in master and
slave mode. When selecting I2C the according bits (bit 13 for master,
bit 11 for slave) must be set in REG_GPIO_2ND_I2C_MODE.

Fix the i2c1 pin group to set bits 0 and 13 to set I2C1 master mode by
default.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@xxxxxxxxx>
---
 drivers/pinctrl/airoha/pinctrl-airoha.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/airoha/pinctrl-airoha.c b/drivers/pinctrl/airoha/pinctrl-airoha.c
index 89979a2c0e357..db6644bcd3aba 100644
--- a/drivers/pinctrl/airoha/pinctrl-airoha.c
+++ b/drivers/pinctrl/airoha/pinctrl-airoha.c
@@ -1158,8 +1158,8 @@ static const struct airoha_pinctrl_func_group i2c_func_group[] = {
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
 			REG_GPIO_2ND_I2C_MODE,
-			GPIO_2ND_I2C_MODE_MASK,
-			GPIO_2ND_I2C_MODE_MASK
+			GPIO_2ND_I2C_MODE_MASK | GPIO_I2C_MASTER_MODE_MODE,
+			GPIO_2ND_I2C_MODE_MASK | GPIO_I2C_MASTER_MODE_MODE,
 		},
 		.regmap_size = 1,
 	},
-- 
2.53.0