[PATCH] ARM: dts: vf-colibri: apply the EXT_IO pin group

[Mehmet Fide]

From: Mehmet Fide <mehmet.fide@xxxxxxxxxxxxxxxxxx>

pinctrl_gpio_ext describes the three Colibri EXT_IO pins, but no node
references it, so the pin controller never applies it and the pads keep
whatever mux and bias they came up with. It is the only pin group in the
Vybrid Colibri device trees that is defined and never used.

Hog it on the pin controller, which is the usual home for pins no device
owns, so EXT_IO_0..2 are muxed as GPIO with the drive settings the group
already spells out.

Signed-off-by: Mehmet Fide <mehmet.fide@xxxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
index 1111111..2222222 100644
--- a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
@@ -171,6 +171,9 @@
 };

 &iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_ext>;
+
 	pinctrl_flexcan0: can0grp {
 		fsl,pins = <
 			VF610_PAD_PTB14__CAN0_RX	0x31F1