[PATCH v8 9/9] arm64: dts: qcom: hamoa: Enable CDSP cooling

[Gaurav Kohli]

From: Dipa Ramesh Mantre <dipa.mantre@xxxxxxxxxxxxxxxx>

Unlike the CPU, the CDSP does not throttle its speed automatically
when it reaches high temperatures in hamoa.

Set up CDSP cooling by throttling the cdsp, when it reaches 95°C.

Add polling-delay-passive so the governor periodically evaluates
the zone during passive cooling and steps up cooling levels when
temperature stabilizes below the next trip.

Update the NSP passive trip thresholds to 105°C to align with the
higher temperature specification for Hamoa IOT.

Signed-off-by: Dipa Ramesh Mantre <dipa.mantre@xxxxxxxxxxxxxxxx>
Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
Signed-off-by: Gaurav Kohli <gaurav.kohli@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 16 ++++++++
 arch/arm64/boot/dts/qcom/hamoa.dtsi        | 63 ++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
index 9fa86bb6438e..5d9e1a1b0668 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -1685,3 +1685,19 @@ trip-point0 {
 		};
 	};
 };
+
+&nsp0_alert0 {
+	temperature = <105000>;
+};
+
+&nsp1_alert0 {
+	temperature = <105000>;
+};
+
+&nsp2_alert0 {
+	temperature = <105000>;
+};
+
+&nsp3_alert0 {
+	temperature = <105000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index 09527dcf9576..ba453c8ca80d 100644
--- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -23,6 +23,7 @@
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/qcom,pas.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -8971,6 +8972,8 @@ remoteproc_cdsp: remoteproc@32300000 {
 
 			status = "disabled";
 
+			#cooling-cells = <3>;
+
 			glink-edge {
 				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
 							     IPCC_MPROC_SIGNAL_GLINK_QMP
@@ -9558,6 +9561,7 @@ aoss0-critical {
 		};
 
 		thermal_nsp0: nsp0-thermal {
+			polling-delay-passive = <200>;
 			thermal-sensors = <&tsens3 1>;
 
 			trips {
@@ -9567,15 +9571,30 @@ trip-point0 {
 					type = "hot";
 				};
 
+				nsp0_alert0: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp0-critical {
 					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp0_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		thermal_nsp1: nsp1-thermal {
+			polling-delay-passive = <200>;
 			thermal-sensors = <&tsens3 2>;
 
 			trips {
@@ -9585,15 +9604,30 @@ trip-point0 {
 					type = "hot";
 				};
 
+				nsp1_alert0: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp1-critical {
 					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp1_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		thermal_nsp2: nsp2-thermal {
+			polling-delay-passive = <200>;
 			thermal-sensors = <&tsens3 3>;
 
 			trips {
@@ -9603,15 +9637,30 @@ trip-point0 {
 					type = "hot";
 				};
 
+				nsp2_alert0: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp2-critical {
 					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp2_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		thermal_nsp3: nsp3-thermal {
+			polling-delay-passive = <200>;
 			thermal-sensors = <&tsens3 4>;
 
 			trips {
@@ -9621,12 +9670,26 @@ trip-point0 {
 					type = "hot";
 				};
 
+				nsp3_alert0: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp3-critical {
 					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp3_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		thermal_gpuss_0: gpuss-0-thermal {

-- 
2.34.1