[PATCH net-next v6 1/3] dpll: zl3073x: scale poll interval proportionally to timeout

[Ivan Vecera]

Replace the fixed 10 us poll sleep in zl3073x_poll_zero_u8() with
timeout_us / 50. This scales the sleep interval proportionally to
the timeout, targeting approximately 50 iterations regardless of
the timeout magnitude.

The fixed 10 us interval was adequate for the existing 25-50 ms
timeouts but wasteful for the longer PTP-related timeouts (up to
3000 ms for phase step) added in the following patches, where it
would generate on the order of 10^5 bus transactions per wait.

Signed-off-by: Ivan Vecera <ivecera@xxxxxxxxxx>
---
 drivers/dpll/zl3073x/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dpll/zl3073x/core.c b/drivers/dpll/zl3073x/core.c
index 5b2d77f2c2288e..2e8b52c8de5e26 100644
--- a/drivers/dpll/zl3073x/core.c
+++ b/drivers/dpll/zl3073x/core.c
@@ -322,7 +322,7 @@ int zl3073x_write_u48(struct zl3073x_dev *zldev, unsigned int reg, u64 val)
 int zl3073x_poll_zero_u8(struct zl3073x_dev *zldev, unsigned int reg,
 			 u8 mask, unsigned int timeout_us)
 {
-#define ZL_POLL_SLEEP_US 10
+	unsigned int sleep_us = timeout_us / 50;
 	unsigned int val;
 
 	/* Check the register is 8bit */
@@ -336,7 +336,7 @@ int zl3073x_poll_zero_u8(struct zl3073x_dev *zldev, unsigned int reg,
 	reg = ZL_REG_ADDR(reg) + ZL_RANGE_OFFSET;
 
 	return regmap_read_poll_timeout(zldev->regmap, reg, val, !(val & mask),
-					ZL_POLL_SLEEP_US, timeout_us);
+					sleep_us, timeout_us);
 }
 
 int zl3073x_mb_op(struct zl3073x_dev *zldev, unsigned int op_reg, u8 op_val,
-- 
2.54.0