Re: [PATCH 1/2] arm64: dts: qcom: hamoa-iot-evk: Add eDP display overlay
From: Anand Tiwari
Date: Mon Aug 10 2026 - 04:26:52 EST
On Fri, Aug 07, 2026 at 04:01:05PM -0500, Bjorn Andersson wrote:
> On Fri, Aug 07, 2026 at 03:30:13PM +0530, Anand Tiwari wrote:
> > On Thu, Aug 06, 2026 at 07:05:37PM -0500, Bjorn Andersson wrote:
> > > On Thu, Aug 06, 2026 at 10:01:20PM +0530, Anand Tiwari wrote:
> > > > Move the eDP panel configuration and related power, backlight, and pinctrl
> > > > nodes into a separate overlay. Keep the base DTB suitable for headless
> > > > variants and provide a composite DTB for headed variants.
> > >
> > > To quote:
> > > https://docs.kernel.org/process/submitting-patches.html#describe-your-changes
> > >
> > > """
> > > Describe your problem. Whether your patch is a one-line bug fix or 5000
> > > lines of a new feature, there must be an underlying problem that
> > > motivated you to do this work. Convince the reviewer that there is a
> > > problem worth fixing and that it makes sense for them to read past the
> > > first paragraph.
> > > """
> > >
> > > In fact, I'm not even able to guess what the problem you're fixing here.
> > >
> > > Regards,
> > > Bjorn
> > >
> >
> > The problem is that the base device trees currently describe the eDP
> > display hardware unconditionally. However, Hamoa and Purwa IoT EVKs
> > are also available in headless variants without an eDP panel.
> >
> > With current base DTBs, headless variants are not stable where eDP panel is not
> > physically connected with board and userspace is trying to use it.
> >
> > This series fixes the inaccurate hardware description by keeping the
> > base DTBs limited to hardware common to both variants and moving the
> > eDP-specific nodes into separate overlays. The base DTB can therefore
> > be used for headless variants, while the overlay is selected for
> > headed variants.
> >
>
> I see, then it seems your change does make sense. I don't understand why
> you didn't explained this in the commit message though.
>
I will update the commit msg with details, currently details added only in
series cover letter.
>
> I further do not understand how it can be that nobody noticed that the
> display was missing on their Hamoa EVK during the 11 months since I
> merged the offending patch - this is completely unacceptable.
>
> Regards,
> Bjorn
>
Internally, we have always required the eDP panel to be connected during
testing. In theory, this platform is expected to have a display attached
by default.
1. The only difference is that the eDP connector on this board is externally
accessible and can be disconnected quite easily.
2. Also, only the boards shipped to customers are delivered without an eDP
panel attached by default, which is why this requirement exists.
> > > >
> > > > Signed-off-by: Anand Tiwari <anand.tiwari@xxxxxxxxxxxxxxxx>
> > > > ---
> > > > arch/arm64/boot/dts/qcom/Makefile | 3 +
> > > > arch/arm64/boot/dts/qcom/hamoa-iot-evk-edp.dtso | 126 ++++++++++++++++++++++++
> > > > arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 107 --------------------
> > > > 3 files changed, 129 insertions(+), 107 deletions(-)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > > > index 1c86e7e98f55..bb0da34983c8 100644
> > > > --- a/arch/arm64/boot/dts/qcom/Makefile
> > > > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > > > @@ -20,6 +20,9 @@ dtb-$(CONFIG_ARCH_QCOM) += glymur-asus-zenbook-a16-ux3607oa.dtb
> > > > dtb-$(CONFIG_ARCH_QCOM) += glymur-crd.dtb
> > > > dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk.dtb
> > > >
> > > > +hamoa-iot-evk-edp-dtbs := hamoa-iot-evk.dtb hamoa-iot-evk-edp.dtbo
> > > > +dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk-edp.dtb
> > > > +
> > > > hamoa-iot-evk-el2-dtbs := hamoa-iot-evk.dtb x1-el2.dtbo
> > > >
> > > > dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk-el2.dtb
> > > > diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk-edp.dtso b/arch/arm64/boot/dts/qcom/hamoa-iot-evk-edp.dtso
> > > > new file mode 100644
> > > > index 000000000000..759d05342627
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk-edp.dtso
> > > > @@ -0,0 +1,126 @@
> > > > +// SPDX-License-Identifier: BSD-3-Clause
> > > > +/*
> > > > + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> > > > + */
> > > > +
> > > > +/dts-v1/;
> > > > +/plugin/;
> > > > +
> > > > +#include <dt-bindings/gpio/gpio.h>
> > > > +
> > > > +&{/} {
> > > > + backlight: backlight {
> > > > + compatible = "pwm-backlight";
> > > > + pwms = <&pmk8550_pwm 0 5000000>;
> > > > + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
> > > > + power-supply = <&vreg_edp_bl>;
> > > > +
> > > > + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
> > > > + pinctrl-names = "default";
> > > > + };
> > > > +
> > > > + vreg_edp_3p3: regulator-edp-3p3 {
> > > > + compatible = "regulator-fixed";
> > > > +
> > > > + regulator-name = "VREG_EDP_3P3";
> > > > + regulator-min-microvolt = <3300000>;
> > > > + regulator-max-microvolt = <3300000>;
> > > > +
> > > > + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
> > > > + enable-active-high;
> > > > +
> > > > + pinctrl-0 = <&edp_reg_en>;
> > > > + pinctrl-names = "default";
> > > > +
> > > > + regulator-boot-on;
> > > > + };
> > > > +
> > > > + vreg_edp_bl: regulator-edp-bl {
> > > > + compatible = "regulator-fixed";
> > > > +
> > > > + regulator-name = "VBL9";
> > > > + regulator-min-microvolt = <3600000>;
> > > > + regulator-max-microvolt = <3600000>;
> > > > +
> > > > + gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
> > > > + enable-active-high;
> > > > +
> > > > + pinctrl-0 = <&edp_bl_reg_en>;
> > > > + pinctrl-names = "default";
> > > > +
> > > > + regulator-boot-on;
> > > > + };
> > > > +};
> > > > +
> > > > +&mdss_dp3 {
> > > > + /delete-property/ #sound-dai-cells;
> > > > +
> > > > + pinctrl-0 = <&edp0_hpd_default>;
> > > > + pinctrl-names = "default";
> > > > +
> > > > + status = "okay";
> > > > +
> > > > + aux-bus {
> > > > + panel {
> > > > + compatible = "edp-panel";
> > > > +
> > > > + backlight = <&backlight>;
> > > > + power-supply = <&vreg_edp_3p3>;
> > > > +
> > > > + port {
> > > > + edp_panel_in: endpoint {
> > > > + remote-endpoint = <&mdss_dp3_out>;
> > > > + };
> > > > + };
> > > > + };
> > > > + };
> > > > +};
> > > > +
> > > > +&mdss_dp3_out {
> > > > + data-lanes = <0 1 2 3>;
> > > > + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
> > > > +
> > > > + remote-endpoint = <&edp_panel_in>;
> > > > +};
> > > > +
> > > > +&mdss_dp3_phy {
> > > > + vdda-phy-supply = <&vreg_l3j_0p8>;
> > > > + vdda-pll-supply = <&vreg_l2j_1p2>;
> > > > +
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&pmc8380_3_gpios {
> > > > + edp_bl_en: edp-bl-en-state {
> > > > + pins = "gpio4";
> > > > + function = "normal";
> > > > + power-source = <1>;
> > > > + input-disable;
> > > > + output-enable;
> > > > + };
> > > > +
> > > > + edp_bl_reg_en: edp-bl-reg-en-state {
> > > > + pins = "gpio10";
> > > > + function = "normal";
> > > > + };
> > > > +};
> > > > +
> > > > +&pmk8550_gpios {
> > > > + edp_bl_pwm: edp-bl-pwm-state {
> > > > + pins = "gpio5";
> > > > + function = "func3";
> > > > + };
> > > > +};
> > > > +
> > > > +&pmk8550_pwm {
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&tlmm {
> > > > + edp_reg_en: edp-reg-en-state {
> > > > + pins = "gpio70";
> > > > + function = "gpio";
> > > > + drive-strength = <16>;
> > > > + bias-disable;
> > > > + };
> > > > +};
> > > > diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> > > > index 9fa86bb6438e..78cefd5391b1 100644
> > > > --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> > > > +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> > > > @@ -19,16 +19,6 @@ aliases {
> > > > serial1 = &uart14;
> > > > };
> > > >
> > > > - backlight: backlight {
> > > > - compatible = "pwm-backlight";
> > > > - pwms = <&pmk8550_pwm 0 5000000>;
> > > > - enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
> > > > - power-supply = <&vreg_edp_bl>;
> > > > -
> > > > - pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
> > > > - pinctrl-names = "default";
> > > > - };
> > > > -
> > > > clocks {
> > > > mcp2518fd_osc: clock-40000000 {
> > > > compatible = "fixed-clock";
> > > > @@ -213,38 +203,6 @@ pmic_glink_ss2_con_sbu_in: endpoint {
> > > > };
> > > > };
> > > >
> > > > - vreg_edp_3p3: regulator-edp-3p3 {
> > > > - compatible = "regulator-fixed";
> > > > -
> > > > - regulator-name = "VREG_EDP_3P3";
> > > > - regulator-min-microvolt = <3300000>;
> > > > - regulator-max-microvolt = <3300000>;
> > > > -
> > > > - gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
> > > > - enable-active-high;
> > > > -
> > > > - pinctrl-0 = <&edp_reg_en>;
> > > > - pinctrl-names = "default";
> > > > -
> > > > - regulator-boot-on;
> > > > - };
> > > > -
> > > > - vreg_edp_bl: regulator-edp-bl {
> > > > - compatible = "regulator-fixed";
> > > > -
> > > > - regulator-name = "VBL9";
> > > > - regulator-min-microvolt = <3600000>;
> > > > - regulator-max-microvolt = <3600000>;
> > > > -
> > > > - gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
> > > > - enable-active-high;
> > > > -
> > > > - pinctrl-0 = <&edp_bl_reg_en>;
> > > > - pinctrl-names = "default";
> > > > -
> > > > - regulator-boot-on;
> > > > - };
> > > > -
> > > > vreg_nvme: regulator-nvme {
> > > > compatible = "regulator-fixed";
> > > >
> > > > @@ -974,44 +932,6 @@ &mdss_dp2_out {
> > > > link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
> > > > };
> > > >
> > > > -&mdss_dp3 {
> > > > - /delete-property/ #sound-dai-cells;
> > > > -
> > > > - pinctrl-0 = <&edp0_hpd_default>;
> > > > - pinctrl-names = "default";
> > > > -
> > > > - status = "okay";
> > > > -
> > > > - aux-bus {
> > > > - panel {
> > > > - compatible = "edp-panel";
> > > > -
> > > > - backlight = <&backlight>;
> > > > - power-supply = <&vreg_edp_3p3>;
> > > > -
> > > > - port {
> > > > - edp_panel_in: endpoint {
> > > > - remote-endpoint = <&mdss_dp3_out>;
> > > > - };
> > > > - };
> > > > - };
> > > > - };
> > > > -};
> > > > -
> > > > -&mdss_dp3_out {
> > > > - data-lanes = <0 1 2 3>;
> > > > - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
> > > > -
> > > > - remote-endpoint = <&edp_panel_in>;
> > > > -};
> > > > -
> > > > -&mdss_dp3_phy {
> > > > - vdda-phy-supply = <&vreg_l3j_0p8>;
> > > > - vdda-pll-supply = <&vreg_l2j_1p2>;
> > > > -
> > > > - status = "okay";
> > > > -};
> > > > -
> > > > &pcie3_port0 {
> > > > vpcie12v-supply = <&vreg_pcie_12v>;
> > > > vpcie3v3-supply = <&vreg_pcie_3v3>;
> > > > @@ -1140,19 +1060,6 @@ led@2 {
> > > > };
> > > >
> > > > &pmc8380_3_gpios {
> > > > - edp_bl_en: edp-bl-en-state {
> > > > - pins = "gpio4";
> > > > - function = "normal";
> > > > - power-source = <1>;
> > > > - input-disable;
> > > > - output-enable;
> > > > - };
> > > > -
> > > > - edp_bl_reg_en: edp-bl-reg-en-state {
> > > > - pins = "gpio10";
> > > > - function = "normal";
> > > > - };
> > > > -
> > > > pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
> > > > pins = "gpio8";
> > > > function = "normal";
> > > > @@ -1181,13 +1088,6 @@ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
> > > > };
> > > > };
> > > >
> > > > -&pmk8550_gpios {
> > > > - edp_bl_pwm: edp-bl-pwm-state {
> > > > - pins = "gpio5";
> > > > - function = "func3";
> > > > - };
> > > > -};
> > > > -
> > > > &pmk8550_pwm {
> > > > status = "okay";
> > > > };
> > > > @@ -1357,13 +1257,6 @@ ec_int_n_default: ec-int-n-state {
> > > > bias-disable;
> > > > };
> > > >
> > > > - edp_reg_en: edp-reg-en-state {
> > > > - pins = "gpio70";
> > > > - function = "gpio";
> > > > - drive-strength = <16>;
> > > > - bias-disable;
> > > > - };
> > > > -
> > > > eusb3_reset_n: eusb3-reset-n-state {
> > > > pins = "gpio6";
> > > > function = "gpio";
> > > >
> > > > --
> > > > 2.54.0
> > > >