[PATCH 05/10] phy: qcom-ipq806x-usb: fix the SS PHY TEST_POWERDOWN bit

[Dmitry Baryshkov]

The SS PHY exit sequence tries to put the PHY into retention via the
TEST_POWERDOWN bit of SS_PHY_CTRL, but defines that bit as BIT(27). In
the DWC3 QSCRATCH SS_PHY_CTRL register TEST_POWERDOWN is bit 26 (see
the downstream phy-msm-ssusb driver for the same IP generation), so the
sequence pokes an unrelated bit and the PHY is never powered down.

Fixes: ef19b117b834 ("phy: qualcomm: add qcom ipq806x dwc usb phy driver")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
index 21b59d4ca8d2..cf77e0a66e20 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
@@ -51,7 +51,7 @@
 
 /* PHY_CTRL_REG */
 #define SSUSB_CTRL_REF_USE_PAD		BIT(28)
-#define SSUSB_CTRL_TEST_POWERDOWN	BIT(27)
+#define SSUSB_CTRL_TEST_POWERDOWN	BIT(26)
 #define SSUSB_CTRL_LANE0_PWR_PRESENT	BIT(24)
 #define SSUSB_CTRL_SS_PHY_EN		BIT(8)
 #define SSUSB_CTRL_SS_PHY_RESET		BIT(7)

-- 
2.47.3