[PATCH] ARM: dts: vf610: describe the L2 cache geometry

[Mehmet Fide]

From: Mehmet Fide <mehmet.fide@xxxxxxxxxxxxxxxxxx>

The L2 node names the controller and its level, but not its size, line
size or set count, so cacheinfo cannot describe the last level of the
hierarchy even though the cpu node already points at it.

Fill them in from the Vybrid reference manual (NXP VFXXXRM), section
3.2.3: 8 way set associative, 512 KB, 32 byte line, so 2048 sets.

Not tested on VF610 silicon, the values come from the manual. The
matching change for the L1 caches was tested on a VF500.

Signed-off-by: Mehmet Fide <mehmet.fide@xxxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/nxp/vf/vf610.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/vf/vf610.dtsi b/arch/arm/boot/dts/nxp/vf/vf610.dtsi
index 2fba923..ea59e3d 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610.dtsi
@@ -14,6 +14,9 @@
 		reg = <0x40006000 0x1000>;
 		cache-unified;
 		cache-level = <2>;
+		cache-line-size = <32>;
+		cache-sets = <2048>;
+		cache-size = <0x80000>;
 		arm,data-latency = <3 3 3>;
 		arm,tag-latency = <2 2 2>;
 	};
-- 
2.54.0