[PATCH 3/7] arm64: dts: qcom: Add Motorola One

From: Adam Skladowski

Date: Mon Aug 10 2026 - 13:04:11 EST

Add a devicetree for the Motorola One smartphone, which is based
on the Jacala/MSM8953 SoC.

Supported functionality as of this initial submission:
* I2C peripherals (Touchscreen,NFC)
* Power Button, Volume Keys
* Regulators (PM8953)
* Remoteprocs (ADSP, MPSS, WCNSS)
* USB

Device tree also contains supply maps to other subsystems like MDSS
but due to missing dependencies like panel those are disabled.

Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/msm8953-motorola-deen.dts | 443 +++++++++++++++++++++
2 files changed, 444 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1c86e7e98f55..11e953657691 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918hd.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-flipkart-rimob.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-deen.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8953-motorola-deen.dts b/arch/arm64/boot/dts/qcom/msm8953-motorola-deen.dts
new file mode 100644
index 000000000000..d03b314cd1e8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-motorola-deen.dts
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2026 Adam Skladowski <a39skl@xxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+ model = "Motorola One";
+ compatible = "motorola,deen", "qcom,msm8953";
+ chassis-type = "handset";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_key_default>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ reserved-memory {
+ qseecom_mem: qseecom@84300000 {
+ reg = <0x0 0x84300000 0x0 0x2000000>;
+ no-map;
+ };
+
+ cont_splash_mem: cont-splash@90001000 {
+ reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>;
+ no-map;
+ };
+
+ reserved@aefd2000 {
+ reg = <0x0 0xaefd2000 0x0 0x2e000>;
+ no-map;
+ };
+
+ reserved@eefe4000 {
+ reg = <0x0 0xeefe4000 0x0 0x1c000>;
+ no-map;
+ };
+
+ ramoops@ef000000 {
+ compatible = "ramoops";
+ reg = <0x0 0xef000000 0x0 0x80000>;
+ console-size = <0x40000>;
+ ftrace-size = <0>;
+ record-size = <0x3f800>;
+ pmsg-size = <0x800>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&hsusb_phy {
+ vdd-supply = <&pm8953_l3>;
+ vdda-pll-supply = <&pm8953_l7>;
+ vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+ status = "okay";
+};
+
+&i2c_1 {
+ status = "disabled";
+
+ typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_RISING>;
+
+ status = "disabled";
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ };
+ };
+};
+
+&i2c_2 {
+ status = "okay";
+};
+
+&i2c_3 {
+ status = "okay";
+
+ touchscreen@62 {
+ compatible = "novatek,nt36672a-ts";
+ reg = <0x62>;
+
+ interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+ iovcc-supply = <&pm8953_l6>;
+
+ pinctrl-0 = <&ts_reset_default &ts_int_default>;
+ pinctrl-1 = <&ts_reset_sleep &ts_int_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1520>;
+ };
+};
+
+&i2c_5 {
+ status = "okay";
+
+ npc100: pn533@28 {
+ compatible = "nxp,nxp-nci-i2c";
+
+ reg = <0x28>;
+
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&nfc_firm_default &nfc_irq_default &nfc_pwr_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&ibb {
+ qcom,discharge-resistor-kohms = <32>;
+};
+
+&lpass {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&pm8953_s3>;
+ vddio-supply = <&pm8953_l6>;
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vcca-supply = <&pm8953_l3>;
+};
+
+&mpss {
+ pll-supply = <&pm8953_l7>;
+
+ status = "okay";
+};
+
+&pm8953_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pmi8950_wled {
+ qcom,current-limit-microamp = <25000>;
+ qcom,num-strings = <2>;
+ qcom,cabc;
+ qcom,external-pfet;
+};
+
+&q6afedai {
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
+ qcom,sd-lines = <0>;
+ };
+
+ dai@127 {
+ reg = <QUINARY_MI2S_RX>;
+ qcom,sd-lines = <1>;
+ };
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8953-regulators";
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_l1-supply = <&pm8953_s3>;
+ vdd_l2_l3-supply = <&pm8953_s3>;
+ vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+ vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+ vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+ pm8953_s1: s1 {
+ regulator-min-microvolt = <863000>;
+ regulator-max-microvolt = <1152000>;
+ };
+
+ pm8953_s3: s3 {
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1224000>;
+ };
+
+ pm8953_s4: s4 {
+ regulator-min-microvolt = <1896000>;
+ regulator-max-microvolt = <2048000>;
+ };
+
+ pm8953_l1: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ pm8953_l2: l2 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8953_l3: l3 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-allow-set-load;
+ };
+
+ pm8953_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8953_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8953_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
+ };
+
+ pm8953_l8: l8 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8953_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8953_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8953_l11: l11 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8953_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8953_l13: l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3125000>;
+ };
+
+ pm8953_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8953_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8953_l17: l17 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8953_l19: l19 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8953_l22: l22 {
+ regulator-always-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8953_l23: l23 {
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8953_l8>;
+ vqmmc-supply = <&pm8953_l5>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&pm8953_l11>;
+ vqmmc-supply = <&pm8953_l12>;
+
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <96 4>, <111 1>, <126 1>;
+
+ disp_reset_n_active: disp-reset-n-active-state {
+ pins = "gpio61";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ disp_reset_n_sleep: disp-reset-n-sleep-state {
+ pins = "gpio61";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ mi2s_sec_act: mi2s-quat-active-state {
+ pins = "gpio135", "gpio136", "gpio137", "gpio138";
+ function = "sec_mi2s";
+ drive-strength = <8>;
+ };
+
+ mi2s_sec_sus: mi2s-quat-sleep-state {
+ pins = "gpio135", "gpio136", "gpio137", "gpio138";
+ function = "sec_mi2s";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ nfc_irq_default: nfc-irq-state {
+ pins = "gpio17";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ nfc_pwr_default: nfc-pwr-state {
+ pins = "gpio16";
+ function = "gpio";
+ bias-pull-down;
+ output-low;
+ drive-strength = <2>;
+ };
+
+ nfc_firm_default: nfc-firm-state {
+ pins = "gpio62";
+ function = "gpio";
+ bias-pull-down;
+ output-low;
+ drive-strength = <2>;
+ };
+
+ ts_int_default: ts-int-state {
+ pins = "gpio65";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_int_sleep: ts-int-sleep-state {
+ pins = "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ ts_reset_default: ts-reset-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_reset_sleep: ts-reset-sleep-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&wcnss {
+ vddpx-supply = <&pm8953_l5>;
+
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3660b";
+
+ vddxo-supply = <&pm8953_l7>;
+ vddrfa-supply = <&pm8953_l19>;
+ vddpa-supply = <&pm8953_l9>;
+ vdddig-supply = <&pm8953_l5>;
+
+ status = "okay";
+};

--
2.55.0