Re: [PATCH v3 1/2] dmaengine: dw-edma: Enable Chan Separation via VSEC

[Frank Li]

On Mon, Aug 10, 2026 at 03:40:01PM +0530, Devendra K Verma wrote:
> As per, 'Designware Cores PCI Express DM Controller - Reference
> Manual', section 3.2.34.3, VSEC for DEVICE INFORMATION supports
> the channel separation mechanisms. Basically, the HDMA IP allows
> the user to configure the separation between DMA channel
> registers and retrieve it via the VSEC capability mentioned
> above.
>
> HDMA IP supports the channel register space separation from
> 256B to 32KB. Default supported size is 256B.
>
> Signed-off-by: Devendra K Verma <devverma@xxxxxxx>
> ---
> Changes in v2:
>    o Replaced 'ch_sep_sz' with 'ch_space_sz' wherever
>      applicable upon reviewer recommendation.
>    o Dropped 1/3 patch of this series, after review,
>      now the 2/3 is 1/2 of the current patch series.
>
> Changes in v1:
>    o Modified dw_edma_get_ch_sep_sz() as per review comment.
>      The function now supports ch_sep_sz up to 32KB.
>    o Updated to description to reflect the supported channel
>      separation sizes.
> ---
>  drivers/dma/dw-edma/dw-edma-pcie.c | 20 +++++++++++++++++---
>  1 file changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
> index 791c46e8ae4c..5d7507a64056 100644
> --- a/drivers/dma/dw-edma/dw-edma-pcie.c
> +++ b/drivers/dma/dw-edma/dw-edma-pcie.c
> @@ -31,8 +31,10 @@
>
>  #define DW_PCIE_XILINX_MDB_VSEC_DMA_ID		0x6
>  #define DW_PCIE_XILINX_MDB_VSEC_ID		0x20
> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_BAR		GENMASK(10, 8)
>  #define DW_PCIE_XILINX_MDB_VSEC_DMA_MAP		GENMASK(2, 0)
> +#define DW_PCIE_XILINX_MDB_VSEC_DMA_BAR		GENMASK(10, 8)

Don't mix code cleanup or reorg into this improvement patches.

> +/* AMD CPM6 (Xilinx) supported cap */
> +#define DW_PCIE_XILINX_CPM6_VSEC_CH_SEP		GENMASK(18, 16)
>  #define DW_PCIE_XILINX_MDB_VSEC_DMA_WR_CH	GENMASK(9, 0)
>  #define DW_PCIE_XILINX_MDB_VSEC_DMA_RD_CH	GENMASK(25, 16)
>
> @@ -73,6 +75,7 @@ struct dw_edma_pcie_data {
>  	u16				wr_ch_cnt;
>  	u16				rd_ch_cnt;
>  	u64				devmem_phys_off;
> +	u32				ch_space_sz;
>  };
>
>  static const struct dw_edma_pcie_data snps_edda_data = {
> @@ -127,7 +130,7 @@ static const struct dw_edma_pcie_data xilinx_mdb_data = {
>  };
>
>  static const struct dw_edma_pcie_data xilinx_cpm6_dma_data = {
> -	/* MDB registers location */
> +	/* CPM6 registers location */

This typo fix have not mixed this patch.

>  	.rg.bar				= BAR_0,
>  	.rg.off				= SZ_4K,	/*  4 Kbytes */
>  	.rg.sz				= SZ_8K,	/*  8 Kbytes */
> @@ -189,6 +192,13 @@ static int dw_edma_pcie_irq_vector(struct device *dev, unsigned int nr)
>  	return pci_irq_vector(to_pci_dev(dev), nr);
>  }
>
> +static u32 dw_edma_get_ch_space_sz(u32 val)
> +{
> +	if (val > 0 && val <= 7)
> +		return 256 << val;
> +	return 256;
> +}
> +
>  static u64 dw_edma_pcie_address(struct device *dev, phys_addr_t cpu_addr)
>  {
>  	struct pci_dev *pdev = to_pci_dev(dev);
> @@ -279,6 +289,10 @@ static void dw_edma_pcie_get_xilinx_dma_data(struct pci_dev *pdev,
>  	pdata->mf = map;
>  	pdata->rg.bar = FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_BAR, val);
>
> +	if (pdev->device == PCI_DEVICE_ID_XILINX_B00F)
> +		pdata->ch_space_sz = dw_edma_get_ch_space_sz
> +					(FIELD_GET(DW_PCIE_XILINX_CPM6_VSEC_CH_SEP, val));
> +
>  	pci_read_config_dword(pdev, vsec + 0xc, &val);
>  	pdata->wr_ch_cnt = min(pdata->wr_ch_cnt,
>  			       FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_WR_CH, val));
> @@ -324,9 +338,9 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
>  	struct dw_edma_pcie_data *pdata = (void *)pid->driver_data;
>  	struct device *dev = &pdev->dev;
>  	struct dw_edma_chip *chip;
> +	bool non_ll = false;
>  	int err, nr_irqs;
>  	int i, mask;
> -	bool non_ll = false;

unnecssary change here

Frank
>
>  	if (!pdata)
>  		return -ENODEV;
> --
> 2.43.0
>