Re: [PATCH 1/2] dt-bindings: display: panel: Add bindings for Novatek NT37703

[Esteban Urrutia]

On 8/11/26 9:05 AM, David Heidelberg wrote:
> Hi Esteban,
> 
> Usually the used pattern is vendor,ddic+panel-model
> 
> novatek,nt37703-motorola-bronco
> 
> ...but motorola bronco isn't the model of the panel.
> 
> My recommendation - look at some video of screen replacement, stop at moment
> when FLEX cable from panel is visible and that's where the panel model usually is.


I somewhat doubt the panel model would be located in the FPC cable.
I did search anyway but didn't find anything of interest. And I'm not
willing to risk damaging the display flex or the battery of my
development device just for a possibility either.
For the compatible pattern I used the implemented pattern for the
NT36523 TDDI, which is also used for other ICs such as the RM69380.

So, I believe it should be okay to leave the compatible as is.

> David Heidelberg


Regards,
Esteban