Re: [PATCH v3 1/6] dt-bindings: clock: agilex5: Add USB3.1 reference clock ID

[Krzysztof Kozlowski]

On Wed, Aug 12, 2026 at 03:32:54PM +0800, Adrian Ng Ho Yin wrote:
> The Synopsys DWC3 USB3.1 controller requires two separately named
> clocks: a suspend clock and a reference clock. The existing binding
> only exposes AGILEX5_USB31_SUSPEND_CLK. Add AGILEX5_USB31_REF_CLK
> to allow DT nodes to reference the reference clock by its own ID,
> and update AGILEX5_NUM_CLKS accordingly.
> 
> Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@xxxxxxxxxx>
> ---
>  include/dt-bindings/clock/intel,agilex5-clkmgr.h | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/include/dt-bindings/clock/intel,agilex5-clkmgr.h b/include/dt-bindings/clock/intel,agilex5-clkmgr.h
> index 2f3a23b31c5c..196c0bad3e52 100644
> --- a/include/dt-bindings/clock/intel,agilex5-clkmgr.h
> +++ b/include/dt-bindings/clock/intel,agilex5-clkmgr.h
> @@ -95,6 +95,7 @@
>  #define AGILEX5_SOFTPHY_REG_PCLK	79
>  #define AGILEX5_SOFTPHY_PHY_CLK		80
>  #define AGILEX5_SOFTPHY_CTRL_CLK	81
> -#define AGILEX5_NUM_CLKS		82
> +#define AGILEX5_USB31_REF_CLK		82
> +#define AGILEX5_NUM_CLKS		83

Playing old record: you cannot change it. If you change it, then it is
not a binding.

Best regards,
Krzysztof