Re: [PATCH v2 1/5] rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type

From: Gary Guo

Date: Wed Aug 12 2026 - 12:28:35 EST


On Wed Aug 12, 2026 at 12:39 AM BST, Danilo Krummrich wrote:
> Convert IrqVectorRegistration from a devres-managed internal type to a
> lifetime-annotated type that owns the PCI interrupt vector allocation.
> Dropping it frees the vectors.
>
> IrqVector gains a reference to the IrqVectorRegistration it was derived
> from. Since vector() borrows the registration, the compiler prevents the
> allocation from being dropped while any IrqVector (and hence any
> irq::Registration built from it) is still live.
>
> alloc_irq_vectors() returns IrqVectorRegistration<'_> directly, giving
> drivers explicit control over the allocation lifetime, which is needed
> by net and block drivers that re-allocate vectors at runtime, e.g.
> during queue reconfiguration or device recovery.
>
> Signed-off-by: Danilo Krummrich <dakr@xxxxxxxxxx>
> ---
> rust/kernel/pci.rs | 3 +-
> rust/kernel/pci/irq.rs | 127 ++++++++++++++++++++++-------------------
> 2 files changed, 69 insertions(+), 61 deletions(-)
>
> diff --git a/rust/kernel/pci.rs b/rust/kernel/pci.rs
> index c6417af2bb17..2757a0cc0f11 100644
> --- a/rust/kernel/pci.rs
> +++ b/rust/kernel/pci.rs
> @@ -51,7 +51,8 @@
> pub use self::irq::{
> IrqType,
> IrqTypes,
> - IrqVector, //
> + IrqVector,
> + IrqVectorRegistration, //
> };
>
> /// An adapter for the registration of PCI drivers.
> diff --git a/rust/kernel/pci/irq.rs b/rust/kernel/pci/irq.rs
> index fea484dcf9cf..8e0651587829 100644
> --- a/rust/kernel/pci/irq.rs
> +++ b/rust/kernel/pci/irq.rs
> @@ -7,17 +7,14 @@
> bindings,
> device,
> device::Bound,
> - devres,
> error::to_result,
> irq::{
> self,
> IrqRequest, //
> },
> - prelude::*,
> - str::CStr,
> - sync::aref::ARef, //
> + prelude::*, //
> };
> -use core::ops::RangeInclusive;
> +use core::num::NonZero;
>
> /// IRQ type flags for PCI interrupt allocation.
> #[derive(Debug, Clone, Copy)]
> @@ -78,6 +75,7 @@ const fn as_raw(self) -> u32 {
> #[derive(Clone, Copy)]
> pub struct IrqVector<'a> {
> dev: &'a Device<Bound>,
> + reg: &'a IrqVectorRegistration<'a>,

The registration has a refence to the device so we don't need to keep both reg
and dev?

> index: u32,
> }
>
> @@ -86,87 +84,81 @@ impl<'a> IrqVector<'a> {
> ///
> /// # Safety
> ///
> - /// - `index` must be a valid IRQ vector index for `dev`.
> - /// - `dev` must point to a [`Device`] that has successfully allocated IRQ vectors.
> - unsafe fn new(dev: &'a Device<Bound>, index: u32) -> Self {
> - Self { dev, index }
> + /// - `index` must be a valid IRQ vector index for `reg`.
> + /// - `dev` must be the device `reg` was allocated from.
> + #[inline]
> + unsafe fn new(dev: &'a Device<Bound>, reg: &'a IrqVectorRegistration<'a>, index: u32) -> Self {
> + Self { dev, reg, index }
> }
>
> /// Returns the raw vector index.
> fn index(&self) -> u32 {
> self.index
> }
> +
> + /// Returns the [`IrqVectorRegistration`] this vector was derived from.

#[inline]

> + pub fn vectors(&self) -> &'a IrqVectorRegistration<'a> {
> + self.reg
> + }
> }
>
> impl<'a> TryInto<IrqRequest<'a>> for IrqVector<'a> {
> type Error = Error;
>
> fn try_into(self) -> Result<IrqRequest<'a>> {
> - // SAFETY: `self.as_raw` returns a valid pointer to a `struct pci_dev`.
> + // SAFETY: `self.dev.as_raw()` returns a valid pointer to a `struct pci_dev`.
> let irq = unsafe { bindings::pci_irq_vector(self.dev.as_raw(), self.index()) };
> if irq < 0 {
> return Err(crate::error::Error::from_errno(irq));
> }
> - // SAFETY: `irq` is guaranteed to be a valid IRQ number for `&self`.
> + // SAFETY: `irq` is guaranteed to be a valid IRQ number for `self.dev`.
> Ok(unsafe { IrqRequest::new(self.dev.as_ref(), irq as u32) })
> }
> }
>
> -/// Represents an IRQ vector allocation for a PCI device.
> +/// An allocation of PCI interrupt vectors for a device.
> ///
> -/// This type ensures that IRQ vectors are properly allocated and freed by
> -/// tying the allocation to the lifetime of this registration object.
> +/// This type owns the vector allocation; dropping it frees the vectors. IRQ handlers borrow from
> +/// this registration and must be dropped before it is.
> ///
> /// # Invariants
> ///
> -/// The [`Device`] has successfully allocated IRQ vectors.
> -struct IrqVectorRegistration {
> - dev: ARef<Device>,
> +/// `dev` has an allocation of `count` interrupt vectors.
> +pub struct IrqVectorRegistration<'a> {
> + dev: &'a Device<Bound>,
> + count: NonZero<usize>,

I wonder if it should be called "len" as I view this as a collection of IRQ
vectors.

> }
>
> -impl IrqVectorRegistration {
> - /// Allocate and register IRQ vectors for the given PCI device.
> +impl<'a> IrqVectorRegistration<'a> {
> + /// Returns the number of allocated vectors.
> ///
> - /// Allocates IRQ vectors and registers them with devres for automatic cleanup.
> - /// Returns a range of valid IRQ vectors.
> - fn register<'a>(
> - dev: &'a Device<Bound>,
> - min_vecs: u32,
> - max_vecs: u32,
> - irq_types: IrqTypes,
> - ) -> Result<RangeInclusive<IrqVector<'a>>> {
> - // SAFETY:
> - // - `dev.as_raw()` is guaranteed to be a valid pointer to a `struct pci_dev`
> - // by the type invariant of `Device`.
> - // - `pci_alloc_irq_vectors` internally validates all other parameters
> - // and returns error codes.
> - let ret = unsafe {
> - bindings::pci_alloc_irq_vectors(dev.as_raw(), min_vecs, max_vecs, irq_types.as_raw())
> - };
> -
> - to_result(ret)?;
> - let count = ret as u32;
> -
> - // SAFETY:
> - // - `pci_alloc_irq_vectors` returns the number of allocated vectors on success.
> - // - Vectors are 0-based, so valid indices are [0, count-1].
> - // - `pci_alloc_irq_vectors` guarantees `count >= min_vecs > 0`, so both `0` and
> - // `count - 1` are valid IRQ vector indices for `dev`.
> - let range = unsafe { IrqVector::new(dev, 0)..=IrqVector::new(dev, count - 1) };
> + /// This is at least the `min_vecs` that [`Device::alloc_irq_vectors`] was asked for.
> + #[inline]
> + pub fn vector_count(&self) -> usize {
> + self.count.get()
> + }
>
> - // INVARIANT: The IRQ vector allocation for `dev` above was successful.
> - let irq_vecs = Self { dev: dev.into() };
> - devres::register(dev.as_ref(), irq_vecs, GFP_KERNEL)?;
> + /// Returns the [`IrqVector`] at `index`.
> + ///
> + /// The returned [`IrqVector`] borrows from this registration, ensuring the vector allocation
> + /// remains live while any handler is registered on it.

nit: I think this is redundant information as it's just stating what the
signature already conveys.

> + #[inline]
> + pub fn vector(&self, index: usize) -> Result<IrqVector<'_>> {
> + if index >= self.count.get() {
> + return Err(EINVAL);
> + }

Given that the error is for out-of-bound access only, perhaps return `Option`
like `get()` function of various containers?

>
> - Ok(range)
> + // SAFETY: `index` is within bounds of this registration's allocation, and `self.dev` is
> + // the device it was allocated from.
> + Ok(unsafe { IrqVector::new(self.dev, self, index as u32) })
> }
> }
>
> -impl Drop for IrqVectorRegistration {
> +impl Drop for IrqVectorRegistration<'_> {
> + #[inline]
> fn drop(&mut self) {
> - // SAFETY:
> - // - By the type invariant, `self.dev.as_raw()` is a valid pointer to a `struct pci_dev`.
> - // - `self.dev` has successfully allocated IRQ vectors.
> + // SAFETY: By the type invariant, `self.dev.as_raw()` is a valid pointer to a
> + // `struct pci_dev` that has successfully allocated IRQ vectors.
> unsafe { bindings::pci_free_irq_vectors(self.dev.as_raw()) };
> }
> }
> @@ -214,15 +206,16 @@ pub unsafe fn request_threaded_irq<'a, T: crate::irq::ThreadedHandler + 'a>(
> })
> }
>
> - /// Allocate IRQ vectors for this PCI device with automatic cleanup.
> + /// Allocate IRQ vectors for this PCI device.
> ///
> /// Allocates between `min_vecs` and `max_vecs` interrupt vectors for the device.
> /// The allocation will use MSI-X, MSI, or INTx interrupts based on the `irq_types`
> /// parameter and hardware capabilities. When multiple types are specified, the kernel
> /// will try them in order of preference: MSI-X first, then MSI, then INTx interrupts.
> ///
> - /// The allocated vectors are automatically freed when the device is unbound, using the
> - /// devres (device resource management) system.
> + /// The allocated vectors are freed when the returned [`IrqVectorRegistration`] is dropped.
> + /// IRQ handlers registered via [`Self::request_irq`] or [`Self::request_threaded_irq`]
> + /// borrow from the registration, so the compiler ensures they are freed first.
> ///
> /// # Arguments
> ///
> @@ -232,8 +225,8 @@ pub unsafe fn request_threaded_irq<'a, T: crate::irq::ThreadedHandler + 'a>(
> ///
> /// # Returns
> ///
> - /// Returns a range of IRQ vectors that were successfully allocated, or an error if the
> - /// allocation fails or cannot meet the minimum requirement.
> + /// Returns the IRQ vector registration, or an error if `min_vecs` vectors cannot be
> + /// allocated.
> ///
> /// # Examples
> ///
> @@ -256,7 +249,21 @@ pub fn alloc_irq_vectors(
> min_vecs: u32,
> max_vecs: u32,
> irq_types: IrqTypes,
> - ) -> Result<RangeInclusive<IrqVector<'_>>> {
> - IrqVectorRegistration::register(self, min_vecs, max_vecs, irq_types)
> + ) -> Result<IrqVectorRegistration<'_>> {
> + // SAFETY:
> + // - `self.as_raw()` is guaranteed to be a valid pointer to a `struct pci_dev`
> + // by the type invariant of `Device`.
> + // - `pci_alloc_irq_vectors` internally validates all other parameters
> + // and returns error codes.
> + let ret = unsafe {
> + bindings::pci_alloc_irq_vectors(self.as_raw(), min_vecs, max_vecs, irq_types.as_raw())
> + };
> +
> + to_result(ret)?;
> +
> + let count = NonZero::new(ret as usize).ok_or(EINVAL)?;

I don't think `ret` can ever be zero. `expect` or `new_unchecked()` perhaps?

Best,
Gary

> +
> + // INVARIANT: `pci_alloc_irq_vectors()` allocated `count` vectors for `self`.
> + Ok(IrqVectorRegistration { dev: self, count })
> }
> }