Re: [PATCH 4/4] arm64: dts: qcom: Add Retroid Pocket Nova

[Krzysztof Kozlowski]

On Sat, Aug 08, 2026 at 12:37:58PM -0500, Aaron Kling wrote:
> The Retroid Pocket Nova is a high-performance Android-based handheld
> gaming console powered by the Qualcomm Snapdragon 8 Gen 2 processor
> featuring a 4.5-inch 4:3 AMOLED touchscreen.
> 
> Signed-off-by: Aaron Kling <webgeek1234@xxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile                  |   1 +
>  .../boot/dts/qcom/qcs8550-retroidpocket-nova.dts   | 118 +++++++++++++++++++++
>  2 files changed, 119 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 09b3c5b2d9dab..582805e89f4cb 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -196,6 +196,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayntec-odin2mini.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayntec-odin2portal.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayntec-thor.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-retroidpocket-nova.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-retroidpocket-rp6.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-rb5gen2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-retroidpocket-nova.dts b/arch/arm64/boot/dts/qcom/qcs8550-retroidpocket-nova.dts
> new file mode 100644
> index 0000000000000..10dabb1d51f5a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs8550-retroidpocket-nova.dts
> @@ -0,0 +1,118 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include "qcs8550-ayntec-common.dtsi"
> +
> +&{/} {
> +	model = "Retroid Pocket Nova";
> +	compatible = "retroidpocket,nova", "qcom,qcs8550", "qcom,sm8550";
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pmk8550_pwm 0 860000>;
> +		brightness-levels = <1023 0>;
> +		num-interpolated-steps = <1023>;
> +		default-brightness-level = <600>;
> +		power-supply = <&vph_pwr>;
> +		enable-gpios = <&pmk8550_gpios 5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pwm_backlight_default>;
> +
> +		status = "okay";
> +	};
> +
> +	vdd_disp_1v8: vdd-disp-1v8-regulator {

So foo-regulator?

> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_disp_1v8";
> +
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +
> +		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	vdd_disp_2v8: vdd-disp-2v8-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_disp_2v8";
> +
> +		regulator-min-microvolt = <2800000>;
> +		regulator-max-microvolt = <2800000>;
> +
> +		gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	ts_avdd_3v0: regulator-ts-avdd-3v0 {

Or regulator-foo?

Decide and also read:
https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml

Best regards,
Krzysztof