[PATCH] usb: typec: ucsi: Handle connectors already attached at init

[William Bright]

After a cold boot the PPM may already have a partner attached without a
pending connector change to report. On a CYPD6125 the CCI register reads
back 0 in ucsi_init(), so ucsi_connector_change() is never called and the
Type-C mux is left unconfigured for the already-attached port.

Fix this by additionally checking the connector status of every
connector and call ucsi_connector_change() for connectors that are
already attached. Whilst also continuing to call ucsi_connector_change()
for connectors that report a change via the CCI register.

Fixes: ce4c8d21054a ("usb: typec: ucsi: Fix connector check on init")
Signed-off-by: William Bright <william.bright@xxxxxxxxxxx>
---
 drivers/usb/typec/ucsi/ucsi.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index ecbda2a3783c..740ae4a14f7f 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -2136,8 +2136,11 @@ static int ucsi_init(struct ucsi *ucsi)
 	mutex_unlock(&ucsi->ppm_lock);
 	if (ret)
 		return ret;
-	if (UCSI_CCI_CONNECTOR(cci))
-		ucsi_connector_change(ucsi, UCSI_CCI_CONNECTOR(cci));
+
+	for (i = 0; i < ucsi->cap.num_connectors; i++)
+		if (UCSI_CONSTAT(&connector[i], CONNECTED) ||
+		    UCSI_CCI_CONNECTOR(cci) == i + 1)
+			ucsi_connector_change(ucsi, i + 1);
 
 	return 0;
 

---
base-commit: 55431f6adac42f818a0c76594ce2c6c02fe1034d
change-id: 20260813-ucsi-cold-b35e11991b7c

Best regards,
-- 
William Bright <william.bright@xxxxxxxxxxx>