[PATCH v3 2/7] serial: txx9: Drop usage of uart_match_port()

[Uwe Kleine-König (The Capable Hub)]

Where the uart_match_port() function is used it's known that .iotype is
UPIO_PORT. So uart_match_port() is equivalent to comparing .iobase.
Remove the call to uart_match_port() which then only has a single caller
that is handled in the next commit.

Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@xxxxxxxxxxxx>
---
 drivers/tty/serial/serial_txx9.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index ef56979321b9..5b574ed276b2 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -965,7 +965,12 @@ static int serial_txx9_register_port(struct uart_port *port)
 	mutex_lock(&serial_txx9_mutex);
 	for (i = 0; i < UART_NR; i++) {
 		uart = &serial_txx9_ports[i];
-		if (uart_match_port(uart, port)) {
+		/*
+		 * serial_txx9_register_port() is only called from
+		 * pciserial_txx9_init_one(). So .iotype is UPIO_PORT and
+		 * comparing .iobase serves to distinguish ports.
+		 */
+		if (uart->iobase == port->iobase) {
 			uart_remove_one_port(&serial_txx9_reg, uart);
 			break;
 		}
-- 
2.55.0.11.g153666a7d9bb