Re: [PATCH v2] arm64: dts: mediatek: mt8390-genio-common: add boot phase tags

[Carlo Caione]

On Thu Jul 30, 2026 at 10:04 AM CEST, Carlo Caione wrote:
> U-Boot SPL runs after the platform DDR loader has initialized DRAM on
> the Genio 510 and Genio 700 EVKs. It needs the debug UART and eMMC
> controller, together with their clock, syscon, pinctrl, interrupt and
> watchdog providers, to load the firmware FIT.
>
> Mark the nodes consumed by the current SPL configuration with
> 'bootph-pre-ram' so that the canonical devicetree carries the boot-phase
> information and bootloaders do not need local overrides.

Gentle ping on this.

Cheers,

--
Carlo Caione