Re: [PATCH net] xsk: reset the mac header in the generic Tx path

[Jason Xing]

On Fri, Aug 21, 2026 at 1:07 AM Eric Dumazet <edumazet@xxxxxxxxxx> wrote:
>
> On Mon, Aug 17, 2026 at 5:40 PM Petr Oros <poros@xxxxxxxxxx> wrote:
> >
> > __dev_queue_xmit() resets skb->mac_header, __dev_direct_xmit() does not,
> > so a frame taking the qdisc bypass path reaches ndo_start_xmit() with
> > the sentinel left by __finalize_skb_around() and skb_mac_header() points
> > 65535 bytes past skb->head.
> >
> > The packet socket reaches it through packet_direct_xmit(), and
> > packet_parse_headers() was taught to anchor the header by
> > commit c2707480cfbf ("net/packet: reset the MAC header on the
> > packet-socket transmit path"). AF_XDP reaches it through
> > __xsk_generic_xmit(), and net/xdp/xsk.c never sets the mac header.
> >
> > ice reads eth->h_proto through skb_mac_header() on its ordinary Tx path.
> > On an E810 every one of 2817224 AF_XDP frames reached the driver with the
> > sentinel still in place, so the ethertype never came from the frame. With
> > this patch all 5757920 frames of the same test carried the correct 0x88b5.
> > An AF_PACKET sender on the same port read 0x88b5 in both runs.
> >
> > On a KFENCE kernel that read lands inside the pool and gets reported as a
> > use after free of an unrelated object, 387 times in a 180 s run:
> >
> >         BUG: KFENCE: use-after-free read in ice_xmit_frame_ring+0xddb/0x1650 [ice]
> >          ice_xmit_frame_ring+0xddb/0x1650 [ice]
> >          __dev_direct_xmit+0x347/0x4d0
> >          __xsk_generic_xmit+0xc13/0x1e70
> >          __xsk_sendmsg.constprop.0.isra.0+0x519/0x640
> >          xsk_sendmsg+0x6c/0x90
> >
> > Rerunning the same reproducer on the same E810 with this patch applied
> > produced no reports and no bad reads.
> >
> > Anchor the header in xsk_skb_init_misc(), which runs once per skb for
> > both build paths. With IFF_TX_SKB_NO_LINEAR the offset still is not a
> > real header, but it stays in bounds and no such driver reads it.
> >
> > Fixes: 35fcde7f8deb ("xsk: support for Tx")
> > Signed-off-by: Petr Oros <poros@xxxxxxxxxx>
> > ---
> >  net/xdp/xsk.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
> > index 7855ee09c4b640..885427392cb6b3 100644
> > --- a/net/xdp/xsk.c
> > +++ b/net/xdp/xsk.c
> > @@ -931,6 +931,7 @@ static int xsk_skb_init_misc(struct sk_buff *skb, struct xdp_sock *xs,
> >         skb->priority = READ_ONCE(xs->sk.sk_priority);
> >         skb->mark = READ_ONCE(xs->sk.sk_mark);
> >         skb->destructor = xsk_destruct_skb;
> > +       skb_reset_mac_header(skb);
>
> I don't know, I had at some point the goal of removing our dependency
> on mac header in ndo_start_xmit(),
> as this must be skb->data.
>
> ice could use skb_eth_hdr() instead of eth_hdr() or skb_mac_header()
> and save few cycles.
>
> Some drivers call skb_reset_mac_header(skb), this is really a mess.
>
> With AI these days, it should not be too hard to completely remove our
> dependency on mac_header.
>

I saw the status has been changed to 'rejected'. Why is that, I
wonder? I think it's just a fix that can be done in xsk like
skb_reset_network_header() that I'm going to add.

Your suggestion should target net-next if someone volunteers to implement it?

Thanks,
Jason