Re: [PATCH v5 04/13] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250

From: Sreeshankar K

Date: Mon Aug 24 2026 - 10:15:37 EST


Thanks for the review.

Missed that, I apologize. I will send a v6 patchset with everything fixed.

Thanks,
Sreeshankar K

On Mon, 24 Aug 2026 at 19:21, Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx> wrote:
>
> On 26-08-24 13:04:28, Sreeshankar K wrote:
> > Add support for the global clock controller found on SM7250
> > based devices. This should allow most non-multimedia device
> > drivers to probe and control their clocks.
> >
> > Signed-off-by: Sreeshankar K <sreeshankar0910@xxxxxxxxx>
> > ---
> > drivers/clk/qcom/Kconfig | 9 +
> > drivers/clk/qcom/Makefile | 1 +
> > drivers/clk/qcom/gcc-sm7250.c | 2275 +++++++++++++++++++++++++++++++++
> > 3 files changed, 2285 insertions(+)
> > create mode 100644 drivers/clk/qcom/gcc-sm7250.c
>
> [...]
>
> > diff --git a/drivers/clk/qcom/gcc-sm7250.c b/drivers/clk/qcom/gcc-sm7250.c
> > new file mode 100644
> > index 000000000..bf75c8ec1
> > --- /dev/null
> > +++ b/drivers/clk/qcom/gcc-sm7250.c
> > @@ -0,0 +1,2275 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
> > + * Copyright (c) 2026, Sreeshankar K <sreeshankar0910@xxxxxxxxx>
> > + */
> > +
> > +
>
> [...]
>
> > +static struct clk_alpha_pll gpll0 = {
> > + .offset = 0x0,
> > + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
> > + .clkr = {
> > + .enable_reg = 0x52010,
> > + .enable_mask = BIT(0),
> > + .hw.init = &(struct clk_init_data){
>
> You missed my other comment from v4.
>
> const here and everywhere else.
>
> It is always a good practice to compare to other (older) drivers from
> upstream.
>
> > + .name = "gpll0",
> > + .parent_data = &(const struct clk_parent_data){
> > + .index = DT_BI_TCXO,
> > + },
> > + .num_parents = 1,
> > + .ops = &clk_alpha_pll_fixed_lucid_ops,
> > + },
> > + },
> > +};
> > +
>
> [...]