[PATCH 0/2] Introduce basic support for MR-NAVQ95

[Laurentiu Mihalcea]

From: Laurentiu Mihalcea <laurentiu.mihalcea@xxxxxxx>

Hi folks,

So, as the title says, this series attempts to introduce basic support for
NXP's MR-NAVQ95 board. The "basic support" refers to introducing a new DTS
and enabling a couple of peripherals so that the board'll be able to boot
from eMMC/SD/NFS.

So, compared to MX95-19x19-EVK, this board has a smaller form factor
(comparable to the MX95-based FRDM boards) and is designed for
robotics-related applications (e.g. drones, rovers, humanoids, etc...).
The board is currently at revision B and is only available internally.
The board should be officially announced around October/November 2026.

Given that the board and its support are fairly new and still under
development, I would expect some (hopefully) small changes to the DTS.
Hopefully, this'll be acceptable.

The schematics, a brief overview and some pictures of the board are
publicly available at [1].

[1]: https://github.com/NXP-Robotics/MR-NAVQ95

Laurentiu Mihalcea (2):
  dt-bindings: arm: fsl: add MR-NAVQ95 board
  arm64: dts: freescale: add MR-NAVQ95 basic board support

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx95-navq.dts  | 267 ++++++++++++++++++
 3 files changed, 269 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx95-navq.dts

-- 
2.53.0