[PATCH v1 0/1] ARM: dts: draeger: Add devicetrees for Draeger's M48 board.

Next message: Jarkko Sakkinen: "Re: [PATCH v2] ACPI: scan: Do not combine resources that overlap completely"
Previous message: Petko Manolov: "[PATCH v1 1/1] ARM: dts: draeger: Add devicetree files for M48 Intel/Altera SoCFPGA Cyclone"
Next in thread: Petko Manolov: "[PATCH v1 1/1] ARM: dts: draeger: Add devicetree files for M48 on NXP i.MX6(Q)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Petko Manolov

Date: Tue Aug 25 2026 - 10:26:21 EST

Adding the device trees for “Dräger M48 on NXP i.MX6 (Q) and Intel/Altera
SoCFPGA Cyclone V” board variant. It has both (the SoC and FPGA) on the same
carrier and they are cross-monitoring each other.

Petko Manolov (1):
ARM: dts: draeger: Add devicetree files for M48 on NXP i.MX6(Q)

arch/arm/boot/dts/nxp/imx/Makefile | 2 +
.../boot/dts/nxp/imx/imx6dl-draeger-m48.dts | 23 ++
.../boot/dts/nxp/imx/imx6q-draeger-m48.dts | 23 ++
.../boot/dts/nxp/imx/imx6qdl-draeger-m48.dtsi | 369 ++++++++++++++++++
.../boot/dts/nxp/imx/imx6qp-draeger-m48.dts | 78 ++++
5 files changed, 495 insertions(+)
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-draeger-m48.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-draeger-m48.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-draeger-m48.dtsi
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qp-draeger-m48.dts

--
2.47.3