[PATCH v11 05/12] mfd: zx297520v3: Add a clock and reset MFD driver

[Stefan Dösinger]

This driver registers child devices for the zx297520v3 clock and reset
controllers. The clk-zx297520v3 and reset-zte-zx297520v3 submitted in
the next patches will drive the respective functionalities.

Signed-off-by: Stefan Dösinger <stefandoesinger@xxxxxxxxx>

---

Changes v10 (All Lee Jones):
*) drop "select REGMAP_MMIO"
*) Drop comment about unimplemented hwlocks
*) Use MFD_CELL_[NAME|OF]
*) Renamed the device type enum and its values
*) Use device_get_match_data instead of the of_ variant
*) Improved debug messages

Changes v9:
Deassert the LSP reset and enable the LSP pclk here. In practice the
boot rom needs to do that because it prints to an LSP-connected UART and
reads the boot policy from the LSP connected flash chip.

In doing so, I migrated the match data to an enum as mfd.md suggests.

Changes v8:
*) Remove .of_compatible from PHY mfd child

*) Move to drivers/mfd (Sashiko)

For me either soc/zte or mfd/ is fine. Note though that this MFD parent
is very specific to the zx297520v3 SoC. I don't expect this to be reused
anywhere else. There are two more MFD-ish devices in there: soc_sys at
0x140000, which I plan to handle in the same driver, and an i2c PMIC,
which would get its own host driver.

*) Use PLATFORM_DEVID_AUTO (Sashiko). NONE was intentional as I only
ever expect one instance, but I don't see any harm in doing the standard
thing and use AUTO

*) On the suggestion not to put the link to mfd_cells[] into match data:
I see that it is spelled out in Sashiko's mfd.md, written by Lee Jones,
the MFD maintainer. I would appreciate some education on the rationale
behind it: Putting a pointer into the void *data is a common pattern in
the kernel. I don't understand in which situation this can possibly
break?

Both structs are static const in the same compilation unit. data is a
const void *, not a uintptr_t or kernel_ulong_t, so it seems passing a
pointer is the intended use. What am I missing?

Changes v7:
Add phy MFD child

Changes v6: Make the ZTE SoC driver section depend on HAS_IOMEM
(Sashiko). The entire MFD section, which contains MFD_CORE, depends on
HAS_IOMEM even with COMPILE_TEST.

Add a NULL ptr check for of_device_get_match_data (Sashiko). While not
uniform, rave-sp, rohm-bd9576, atc260x, da9052-i2c protect against
incorrect manual attachment that way.

Add lspclk here as well in an attempt to satisfy both Conor Dooley, who
asks for MFD for top and matrix, and Philipp Zabel, who prefers aux but
at least wants the reset driver limited to one driver type.

Changes v5: Use MFD instead of Aux bus for top and matrix crm because of
extra functionality: Reboot in top, hwlock in Matrix.

LSP clocks stay with the aux bus and are thus not handled in this
driver. The clk driver will bind directly to the lspcrm node.
---
 MAINTAINERS                      |   1 +
 drivers/mfd/Kconfig              |  12 +++++
 drivers/mfd/Makefile             |   2 +
 drivers/mfd/zte-zx297520v3-crm.c | 101 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 116 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index acec8c1e0fc9..717ed9439d91 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3906,6 +3906,7 @@ F:	Documentation/devicetree/bindings/clock/zte,zx297520v3-matrixcrm.yaml
 F:	Documentation/devicetree/bindings/clock/zte,zx297520v3-topcrm.yaml
 F:	arch/arm/boot/dts/zte/
 F:	arch/arm/mach-zte/
+F:	drivers/mfd/zte-zx297520v3-crm.c
 F:	include/dt-bindings/clock/zte,zx297520v3-clk.h
 F:	include/dt-bindings/phy/zte,zx297520v3-topcrm.h
 F:	include/dt-bindings/reset/zte,zx297520v3-reset.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e4fd4572472f..ef9d96484bc5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2578,5 +2578,17 @@ config MFD_MAX7360
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_ZTE_ZX297520V3_CRM
+	tristate "ZTE zx297520v3 Clock and Reset Manager"
+	depends on ARCH_ZTE || COMPILE_TEST
+	select MFD_CORE
+	default SOC_ZX297520V3
+	help
+	  Say yes here to enable the driver for the ZTE zx297520v3 clock and
+	  reset manager MFD driver. This driver provides the host device for
+	  the clock and reset drivers and is required to boot the SoC. You
+	  will also need to enable CLK_ZTE_ZX297520V3 and RESET_ZTE_ZX297520V3
+	  to build the actual clock and reset child drivers.
+
 endmenu
 endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 72d3944b0ad8..ab0cba2042a2 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -304,3 +304,5 @@ obj-$(CONFIG_MFD_RSMU_SPI)	+= rsmu_spi.o rsmu_core.o
 obj-$(CONFIG_MFD_UPBOARD_FPGA)	+= upboard-fpga.o
 
 obj-$(CONFIG_MFD_LOONGSON_SE)	+= loongson-se.o
+
+obj-$(CONFIG_MFD_ZTE_ZX297520V3_CRM)	+= zte-zx297520v3-crm.o
diff --git a/drivers/mfd/zte-zx297520v3-crm.c b/drivers/mfd/zte-zx297520v3-crm.c
new file mode 100644
index 000000000000..b098def47e7b
--- /dev/null
+++ b/drivers/mfd/zte-zx297520v3-crm.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026 Stefan Dösinger
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/reset.h>
+
+enum zx_device_type {
+	TYPE_INVALID = 0,
+	TYPE_TOPCRM,
+	TYPE_MATRIXCRM,
+	TYPE_LSPCRM,
+};
+
+static const struct mfd_cell zx297520v3_topcrm_cells[] = {
+	MFD_CELL_NAME("zx297520v3-topclk"),
+	MFD_CELL_NAME("zx297520v3-topreset"),
+	MFD_CELL_OF("reboot", NULL, NULL, 0, 0, "syscon-reboot"),
+	MFD_CELL_NAME("zx297520v3-usb-phy"),
+};
+
+static const struct mfd_cell zx297520v3_matrixcrm_cells[] = {
+	MFD_CELL_NAME("zx297520v3-matrixclk"),
+	MFD_CELL_NAME("zx297520v3-matrixreset"),
+};
+
+static const struct mfd_cell zx297520v3_lspcrm_cells[] = {
+	MFD_CELL_NAME("zx297520v3-lspclk"),
+	MFD_CELL_NAME("zx297520v3-lspreset"),
+};
+
+static int zx297520v3_crm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct mfd_cell *cells;
+	struct reset_control *reset;
+	enum zx_device_type type;
+	unsigned int num_cells;
+	struct clk *pclk;
+
+	type = (enum zx_device_type)(kernel_ulong_t)device_get_match_data(dev);
+	switch (type) {
+	case TYPE_TOPCRM:
+		cells = zx297520v3_topcrm_cells;
+		num_cells = ARRAY_SIZE(zx297520v3_topcrm_cells);
+		break;
+
+	case TYPE_MATRIXCRM:
+		cells = zx297520v3_matrixcrm_cells;
+		num_cells = ARRAY_SIZE(zx297520v3_matrixcrm_cells);
+		break;
+
+	case TYPE_LSPCRM:
+		cells = zx297520v3_lspcrm_cells;
+		num_cells = ARRAY_SIZE(zx297520v3_lspcrm_cells);
+
+		pclk = devm_clk_get_enabled(dev, "pclk");
+		if (IS_ERR(pclk))
+			return dev_err_probe(dev, PTR_ERR(pclk), "Could not get 'pclk'\n");
+
+		reset = devm_reset_control_get_exclusive_deasserted(dev, NULL);
+		if (IS_ERR(reset))
+			return dev_err_probe(dev, PTR_ERR(reset),
+					     "Failed to deassert reset control\n");
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cells, num_cells, NULL, 0, NULL);
+}
+
+static const struct of_device_id of_match_zx297520v3_crm[] = {
+	{ .compatible = "zte,zx297520v3-topcrm", .data = (void *)TYPE_TOPCRM },
+	{ .compatible = "zte,zx297520v3-matrixcrm", .data = (void *)TYPE_MATRIXCRM },
+	{ .compatible = "zte,zx297520v3-lspcrm", .data = (void *)TYPE_LSPCRM },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, of_match_zx297520v3_crm);
+
+static struct platform_driver zx297520v3_crm = {
+	.probe = zx297520v3_crm_probe,
+	.driver = {
+		.name = "zx297520v3-crm",
+		.of_match_table = of_match_zx297520v3_crm,
+	},
+};
+module_platform_driver(zx297520v3_crm);
+
+MODULE_AUTHOR("Stefan Dösinger <stefandoesinger@xxxxxxxxx>");
+MODULE_DESCRIPTION("ZTE zx297520v3 CRM host driver");
+MODULE_LICENSE("GPL");

-- 
2.54.0