Re: [PATCH 2/2] arm64: dts: freescale: add MR-NAVQ95 basic board support

[Fabio Estevam]

Hi Laurentiu,

On Tue, Aug 25, 2026 at 9:11 AM Laurentiu Mihalcea
<laurentiumihalcea111@xxxxxxxxx> wrote:
>
> From: Laurentiu Mihalcea <laurentiu.mihalcea@xxxxxxx>
>
> Add basic support for NXP's MR-NAVQ95 board. This board is designed for
> robotics applications (e.g. drones, rovers, humanoids, etc..) and has the
> following hardware feats (list is not exhaustive):
>
> * based on i.MX95 19x19 SoC
> * 64GB eMMC
> * up to 16GB of LPDDR5 memory
> * 1 x USB 2.0 TypeC
> * 1 x USB 3.0 TypeC
> * 1 x RJ45 port with RTL8211 PHY
>
> The support targets revision B of the board.

Please add the bootph- properties as well.

Elena plans to support this board in U-Boot where they are needed.

For reference, here is a commit that adds the bootph- properties to
the frdm board:
https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux.git/commit/?h=imx/dt64-intend&id=50c0d934698f7602d579ba21262fcca3643c5464