Re: [PATCH 3/5] usb: dwc3: xilinx: fix system suspend and resume PHY handling

[Thinh Nguyen]

On Mon, Aug 10, 2026, Radhey Shyam Pandey wrote:
> System suspend and resume error paths do not handle PHY and clock
> resources correctly. Suspend calls phy_exit() without first powering
> off the PHY and ignores failures, while resume can leave clocks
> enabled if PHY reinitialization fails.
> 
> Propagate errors to the PM core and unwind resources to ensure a
> consistent state on suspend and resume failures.
> 
> Fixes: d6edcdc1ef06 ("usb: dwc3: xilinx: fix usb3 non-wakeup source resume failure")

Does this need to be backported to stable?

BR,
Thinh

> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
> ---
>  drivers/usb/dwc3/dwc3-xilinx.c | 23 ++++++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c
> index 4a04d158f872..894f5f5e8b7a 100644
> --- a/drivers/usb/dwc3/dwc3-xilinx.c
> +++ b/drivers/usb/dwc3/dwc3-xilinx.c
> @@ -403,13 +403,25 @@ static int __maybe_unused dwc3_xlnx_runtime_idle(struct device *dev)
>  static int __maybe_unused dwc3_xlnx_suspend(struct device *dev)
>  {
>  	struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
> +	int ret;
>  
> -	phy_exit(priv_data->usb3_phy);
> +	ret = phy_power_off(priv_data->usb3_phy);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = phy_exit(priv_data->usb3_phy);
> +	if (ret < 0)
> +		goto err_phy_power_on;
>  
>  	/* Disable the clocks */
>  	clk_bulk_disable(priv_data->num_clocks, priv_data->clks);
>  
>  	return 0;
> +
> +err_phy_power_on:
> +	phy_power_on(priv_data->usb3_phy);
> +
> +	return ret;
>  }
>  
>  static int __maybe_unused dwc3_xlnx_resume(struct device *dev)
> @@ -423,15 +435,20 @@ static int __maybe_unused dwc3_xlnx_resume(struct device *dev)
>  
>  	ret = phy_init(priv_data->usb3_phy);
>  	if (ret < 0)
> -		return ret;
> +		goto err_clk_disable;
>  
>  	ret = phy_power_on(priv_data->usb3_phy);
>  	if (ret < 0) {
>  		phy_exit(priv_data->usb3_phy);
> -		return ret;
> +		goto err_clk_disable;
>  	}
>  
>  	return 0;
> +
> +err_clk_disable:
> +	clk_bulk_disable(priv_data->num_clocks, priv_data->clks);
> +
> +	return ret;
>  }
>  
>  static const struct dev_pm_ops dwc3_xlnx_dev_pm_ops = {
> -- 
> 2.43.0
>