Re: [PATCH 1/3] dt-bindings: media: i2c: Add OmniVision OV32C4

From: Conor Dooley

Date: Wed Aug 26 2026 - 12:17:10 EST


On Wed, Aug 26, 2026 at 09:20:00AM +0200, Robert Bozik wrote:
> Add a binding for the OmniVision OV32C4, a 32 megapixel RGBC CMOS image
> sensor with on-chip 4-cell fusion, a 4-lane MIPI CSI-2 D-PHY transmitter
> and the standard SCCB command interface.
>
> The sensor ships in laptops as an under-display camera, where it is
> described by ACPI; the binding follows ovti,ov08x40.yaml, which covers
> the closest relative already in tree.
>
> Signed-off-by: Robert Bozik <robertbozik@xxxxxxxxx>
> Assisted-by: Claude:claude-opus-5 sparse
> Assisted-by: Claude:claude-fable-5 sparse
> ---
> .../bindings/media/i2c/ovti,ov32c4.yaml | 109 ++++++++++++++++++
> 1 file changed, 109 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov32c4.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov32c4.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov32c4.yaml
> new file mode 100644
> index 000000000..be6067c75
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov32c4.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov32c4.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OmniVision OV32C4 Image Sensor
> +
> +maintainers:
> + - Robert Bozik <robertbozik@xxxxxxxxx>
> +
> +description:
> + The OmniVision OV32C4 is a 32 megapixel RGBC (red, green, blue and clear)
> + CMOS image sensor in a 4-cell arrangement, with on-chip 4-cell fusion and
> + binning. It has a 6528x4896 active pixel array, a 4-lane MIPI CSI-2 D-PHY
> + transmitter and the standard SCCB command interface. The driver supports
> + 3264x1840 at 30 fps, 10-bit Bayer, at a link frequency of 400 MHz.
> +
> +allOf:
> + - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> + compatible:
> + const: ovti,ov32c4
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> + description: Input clock (XVCLK), 19.2 MHz.

Where do this name and frequency come from? pin name I presume for the
former? Is 19.2 MHz a mandatory frequency?

> +
> + avdd-supply:
> + description: Analogue circuit voltage supply.
> +
> + dovdd-supply:
> + description: I/O circuit voltage supply.
> +
> + dvdd-supply:
> + description: Digital core voltage supply.

These 3 can just be :true, what they do should be obvious, provided they
match the pin names of the device.

Generally this looks fine to me though..

Cheers,
Conor.

> +
> + reset-gpios:
> + maxItems: 1
> + description: Active low GPIO connected to the XSHUTDOWN pad of the sensor.
> +
> + port:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + additionalProperties: false
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + additionalProperties: false
> +
> + properties:
> + data-lanes:
> + items:
> + - const: 1
> + - const: 2
> + - const: 3
> + - const: 4
> + link-frequencies: true
> + remote-endpoint: true
> +
> + required:
> + - data-lanes
> + - link-frequencies
> + - remote-endpoint
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - port
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + camera@36 {
> + compatible = "ovti,ov32c4";
> + reg = <0x36>;
> +
> + clocks = <&ov32c4_clk>;
> + assigned-clocks = <&ov32c4_clk>;
> + assigned-clock-rates = <19200000>;
> +
> + avdd-supply = <&vreg_2p8>;
> + dovdd-supply = <&vreg_1p8>;
> + dvdd-supply = <&vreg_1p1>;
> +
> + reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
> +
> + port {
> + ov32c4_ep: endpoint {
> + remote-endpoint = <&csiphy0_ep>;
> + data-lanes = <1 2 3 4>;
> + link-frequencies = /bits/ 64 <400000000>;
> + };
> + };
> + };
> + };
> +...
> --
> 2.53.0
>

Attachment: signature.asc
Description: PGP signature