[PATCH v2 0/2] phy: airoha: add support for AN7583 PCIe PHY driver

[Christian Marangi]

This small series introduce support for Airoha AN7583 Gen3 PCIe PHY.

It's not possible to reuse the EN7581 code as the register changed between
the 2 SoC and also the setup method changed (different calibration logic)

Putting the PHY in a dedicated directory is also needed for other series
current pending that will add USB PHY support.

Also a dedicated schema is added as the register names is entirely
different compared to EN7581.

Changes v2:
- Drop move patch (handled in different series)
- Rework to regmap implementation
- Rename files to more specific name
- Add .exit logic
- Drop QPHY in favor of external PHY handling
- Update schema with new requirement and improve example

Christian Marangi (2):
  dt-bindings: phy: airoha: Document support for AN7583 Gen3 PCIe PHY
  phy: airoha: add support for AN7583 Gen3 PCIe PHY driver

 .../phy/airoha,an7583-pcie-gen3-phy.yaml      |  65 ++
 MAINTAINERS                                   |   8 +
 drivers/phy/Kconfig                           |   1 +
 drivers/phy/Makefile                          |   3 +-
 drivers/phy/airoha/Kconfig                    |  13 +
 drivers/phy/airoha/Makefile                   |   2 +
 drivers/phy/airoha/phy-an7583-pcie-regs.h     | 377 ++++++++
 drivers/phy/airoha/phy-an7583-pcie.c          | 815 ++++++++++++++++++
 8 files changed, 1283 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/phy/airoha,an7583-pcie-gen3-phy.yaml
 create mode 100644 drivers/phy/airoha/Kconfig
 create mode 100644 drivers/phy/airoha/Makefile
 create mode 100644 drivers/phy/airoha/phy-an7583-pcie-regs.h
 create mode 100644 drivers/phy/airoha/phy-an7583-pcie.c

-- 
2.53.0