[PATCH 3/3] i2c: qcom-geni: release DMA channels on probe error

[Shengzhuo Wei]

geni_i2c_init() grabs exclusive GPI tx/rx DMA channels when the serial
engine runs in GPI mode. If i2c_add_adapter() subsequently fails, probe
returns without releasing the channels, because the remove callback is
not invoked after a failed probe.

The adapter-registration failure path used to release the channels via
its err_dma label; that release was dropped when the probe tail was
restructured into geni_i2c_init().

Release the channels on the adapter-registration failure path, mirroring
geni_i2c_remove().

Fixes: d8d3bb127ad1 ("i2c: qcom-geni: Isolate serial engine setup")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Shengzhuo Wei <me@xxxxxxxx>
Assisted-by: GLM:5.3
---
 drivers/i2c/busses/i2c-qcom-geni.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 658636c1ee0e..45c770552bd2 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -1189,8 +1189,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
 		return ret;
 
 	ret = i2c_add_adapter(&gi2c->adap);
-	if (ret)
+	if (ret) {
+		release_gpi_dma(gi2c);
 		return dev_err_probe(dev, ret, "Error adding i2c adapter\n");
+	}
 
 	dev_dbg(dev, "Geni-I2C adaptor successfully added\n");
 

-- 
2.47.3