Re: [PATCH v13 5/6] arm64: dts: qcom: Add device tree for Nord Ride board

[Abel Vesa]

On 26-08-28 11:49:57, Shawn Guo wrote:
> From: Deepti Jaggi <deepti.jaggi@xxxxxxxxxxxxxxxx>
> 
> Add initial device tree for the Qualcomm SA8797P Ride reference board,
> which is built on Nord GearVM variant.
> 
>  - Configure UART15 as the primary console and UART4 as the secondary
>    serial port
>  - Enable UFS storage support
>  - Define thermal zones for PMIC dies, UFS, and two SDRAM sensors,
>    all sourced from SCMI sensor protocol on channel 23
> 
> Signed-off-by: Deepti Jaggi <deepti.jaggi@xxxxxxxxxxxxxxxx>
> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxxxxxxxx>
> Tested-by: Yadu M G <yadu.mg@xxxxxxxxxxxxxxxx>
> Signed-off-by: Shawn Guo <shengchao.guo@xxxxxxxxxxxxxxxx>

Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>